Results 1–30 of 60
V1 Minarelli engine - rebuilt with a Polini piston and new cluthces. Also comes with the all the cases as you can see in the pictures. Hard to find. $250.00 OBO. Please email me at email@example.com or text 4027709922.thanks,Kendall
Looking for any mopeds (pedal starts) for winter projects, batavus, puch, really any. Like to find a couple top tanks. Please let me know if you have any around close to Lincoln, NE. My email is firstname.lastname@example.org for a quicker response. Thanks Kendall
Bro, Let me look for you, I havnt been on for a while, but I have a ton of bats and parts. I will be at my shop tomorrow and take a peak for you. Shoot me an email so I can respond faster. email@example.com
Mike, thanks man. Have you tried it with the tubing at all? Just curious.
Looking to do the clutch mod on my M48 batavus, any ideas on how to do so? My friend Quinn told me about the aquariam tubing with the ball bearings. Any other suggestions I would appreciate. Any more low end power I may be able to pull up a hill!!
Looking for a speedo for my Motron v1, current speedo only goes to 40. let me know if any one has any. thanks firstname.lastname@example.org
I have a rear rim on my Motron that is a little bent some how. I am looking for another rear rim or a set. Let me know if any one has any. Thanks Kendall
Jeff, I would go higher on the Batavus, I have a few extra M48 motors laying around that would get it running. You emailed me earlier this week, I will call you this afternoon. Thanks Kendall
Hey bro, yeah send me a picture of it, I live in Lincoln, NE... How far are you away from Lincoln? I have 4 batavus peds, I am interested. email@example.com
Hey bro, let me know if you still have all of this. Email me at firstname.lastname@example.org I may take it all.Kendall
Walt, I sent you a couple emails man, check them and get back to me!
Probably in my junk mail, I will check when I get home from work
Walt, did you send me an email? thanks
Is this available, let me know I am interested w full price.
Putting together an M56 engine and questioning some of the parts, want to buy another M56 engine complete or parts. Please let me know. Or if any one has a V1 ready. Long shot.
For Sale I have a Dellorto 13.13 SHA carb that I literally took out of the new box from treats and did not put it on anything. Also have the Malossi new air filter as well. Looking really for Batavus parts spec. M56 engine. Will sell though as well.
well bro I had it rebuilt by a guy in KC, when he took it apart he noticed the key sheered, he went ahead and rebuilt it and sent it back to me with the stator and flywheel off because he did not have a key for it. So I filed one down this morning and got it the right size, it doesnt hit by much, just a little bit on the very back. You think I could file it alittle? Man these things are a pain.
it is hitting in just one spot, I could file it but I really dont want to. Engine has been rebuilt and the flywheel key was sheered. What do you think Zac?
looking for a cylinder head only, if any one has one please let me know.Thanks
I am having an issue with the magneto rubbing on stator when I tighten it up, I did have to fabricate a new key, but I am having trouble understanding why it is hitting? Anyone have any ideas for me? A friend of mine re-built the engine and the stator/point assembly was off because I had to find a key for it........ Scratching my head and frustrated. ANY M56 guru's out there that can help?
dave I was, would you recommend getting machine work done? I certainly cant afford another one of these?
OK guys, here is a picture of my piston or whats left of it, can anyone give me feedback on why it did this??? I can tell you I switched the main jet from a 180 to 145 in the vm20 mukini carb because a moped friend of mine told me too......... any opinions I would appreciate. thanks
I am not sure but I will inspect it today for a broken ring, I sure hope not though! and I will inspect the bottom end while I take it apart
I did not check the bottom end, but that is a good idea and I will start the tear down process today, thanks Darrell
Morgan, I havnt had the kit and piston on it well probably dont have 5 miles on it. It was probably half throttle, everyone seems to think its a broken ring.... I guess I do not understand why it would break so soon???
thanks man I will check on that, but it seems and sounds like its internal for some reason, even when I turn it over fast I am hearing that "tinging" noise... who knows.
Mike,Any idea why it would be broke already? It hasnt been running for more then 30 mins total. Not sure if I installed it wrong or didnt break it in right??? stinks
Ive got a V1 and put a 80 cc polini kit, vm20 carb with a custom intake, and new exhaust on it, I was driving it tonight it was running fine and fast till it died on me and when it did it made some what of a "tinging" noise??????? Now it cranks and almost wants to start, but no go.... very frustrating, noise was almost like a cover hitting the flywheel, but that is not the case. Any one
Looking for answers, V1 with vm20 carb and custom intake, 80cc polini kit, and new exhaust, died on me tonight, started "tinging" a little before it died, but now will not start? It will crank over and act like it wants to start, but will not.... ANYone have any ideas for me? It was running fine. VERY frustrating......