Results 1–30 of 305
hey dude fins an old timer that was a machinist he couls make you a supersharger in his sleep.Thats gonna be some serious indexing and lathe work
hey will you should use a marbel or granite , i use a machinists measuring table. Or when im serious i rig it to a mill and check it with a dial indicator.do you do your own machining on your race bikes?like port and polish and deck hights-rich
?okein mean 104 stock carb
has anyone put a diffrent stock carb from another perd n thier poo joe?
has anyone kitted their peugot?im looking at 70cc eurokit with15 mm delorto carb,alisl quick exhaust, would thid be a good match up of parts?im lost when it comes to matching up performance parts on a buget.is it easy to find a main jet for thiese thing? i want to upjet after customizing my pipe a bit.
no i mean this Puch made diffrent cylinders and heads like high toruque and what not.did Peugot do the same thing?
Hey does anyone know if poo-joe made high compression heads or diffrent cylinders for better performance like puch example:1.5 hp and 2hp or diffrent head numbers?Thanx Rich
is your bike stock any mods? list please thanx
okey, joew where do you get your knowledge from ..im into the same stuff but lack in knwoledege. i have good idea what im doing kinda..ive been working on moped bymyself since i was 14. but reeds are a little diffrent for me.will a reed made lets say for a polini intake manifold fit mine? matching 14mm with 14mm?if i change reeds do i upjet the carb or what other modifications that are nessacery t
yea man i have a 71 103 and im waiting to find racing parts.
so thiers really nothing you can do but upgrade the reed valves carb and pipe?oh and the famous huge cc kits.are thier any direct replacement reeds that are faster and more efficent that are sold for the poo joe 103?thanx rich
okey.so i have a 71 peugot 103 this thing has the carb and reed valve enter into the case(bottom end).how would you port for a longer duration in timing ..i want to upjet the carb and put a pipe on it.how do you know that the case port match the cylinder ports, what method of measuring these gaps is used?thanx rich
I have the infamous POO-JOE 103 1971, question is can i replace the reed valve with one of 500cc.nl...like one from the polini kit or will it run all wackedout?thanx rich
hey man i have lots of parts for that bike intrested?
YEa dude some pics man let use see this, your giving me ideas
THanx guys but i dont clearly understand a part in the porting step by stepThe top of the pistons travel is usually flush with the top of the head, but check before you make your mark. This is a very conservative timing point that will work well for all applications. It won’t give the best power, but you won’t go to far and remove material you cannot put back. -----You should
i have a puch maxi 1 speed. I did a little poking around and figured that if i loose the base gasket i will achive a higherCR. so i did and my piston was hitting the plug so i made my own gasket out of some aircraft AL. i used something like 20 thou. thickness. ok it worked. noticed a very small amount of take off, took out my baffle in the exhaust and drilled my jet like 5 thou bigger. RAN NICE,
hey man i have on throw me a reasonable offer , and pay shipping charges i have 2 os these and lots of cady parts
has anyone tried lightening up the fly wheel by putting it on a lathe to make it lighter? I would like to do this to my crank as well. I just figure more RPM more top end speed, or just running a single ring?-Richp.s i wanna do this to a puch maxi 2hp
do you guys know the web site "porting for dummies" im going to try it on my spare cylinder.Q#2 does anyone know how much i can mill a 1 cylinder head on a puch maxi 2 hp engine? 1 speed 1976 if it helpsThanx for the help
hey dude i have the same ped too. i bought it went i was going to PA for the national mopar show. i found it in a junkyard.I havent played with it yet looking for the belt for the clutches.richhow are they performance wise???
dont worry im selling everything check general forumrich
Hey dude im in canada and my puch e50 1speed hits 33mph without effort(full throttle) now my low end is quick im thinking its time to change the gear ratios, the thing is i dont want to damage the clutch...i dont have alot of$$$ to spend.I need to gett a larger wheel do you know what rim and tire will fit the maxi.s?Do you have any more trick??how about stuffing cases?port matching?increaseing com
Hey brandon what kinda plans jigs didi he use???i build them too i have a minibike chopper i made out of a yamaha 80cc dirt bike down tude and front forks then mid frame i welded in a artic cat frame then for the swing arm i used a 80cc honda.....well it looks nothing professional like your brothers.Rich
hey dude im going to attempt a bore on one of my extra carbs this weekend i wanna see how it works.Awsome ideaWhat type of material would you use for stuffing cases?ThanxRich