Results 1–30 of 277
Karl S — 11 years ago
buy sell thread if it's not just me and evan looking at this thread
Karl S — 11 years ago
Album @ http://imgur.com/a/iriyU#0Clubmins, barely used. Some wear on the powdercoat from throttle and clamp; should cover up nicely. $20 (msrp $25)TUN chrome kickstand $20 brand new never used all hardware included. you save shipping. Left side oval mount.ebr stabilizer brand new never mounted. $10Domino throttle party (sorry no decomp/starter lever on this one) $25 probably could use a hit of b
Karl S — 11 years ago
I imagine the two halves screw apart, and you tighten it down with the two tubes of the forks in the middle.
Karl S — 11 years ago
To be fair I have a hard time getting bikes to idle nicely
Karl S — 11 years ago
how do you folks keep your piston from rotating while you drill it? are you vising them?
Karl S — 11 years ago
You talking about this one?
Karl S — 11 years ago
you're having trouble with your engine pinging?
Karl S — 12 years ago
Morning love-bump
Karl S — 12 years ago
adding more oil does not do the same thing as upjetting. Lean and rich refer to the mix of fuel and air, not just the amount of oil in fuel to air.
Karl S — 12 years ago
Mopedarmy isn't a trademark, do whatever you want.
Karl S — 12 years ago
yeah definitely wont work. definitely.
Karl S — 12 years ago
NOAs said above, you need a DL or moped licence. You want to get pulled over with a suspended license after a DUI? Not going easy on yourself...Electric bicycle doesn't sound like a bad idea though.
Karl S — 12 years ago
search for fred's guide and read that. It's on the wiki.
Karl S — 12 years ago
you hang with a gang for a while and if they decide they want you to be a member, they invite you in. As long as you're a good person most gangs probably won't mind you riding with them once and a while.keep in mind the difference between a gang and a branch. If you've got a few buds and want to a start a gang, no problem. A gang can become a branch by becoming voted in by the exist
Karl S — 12 years ago
UPJET DUMMY
Karl S — 12 years ago
use the search, wiki, rinse repeat
Karl S — 12 years ago
just look at the tuning spreadsheet
Karl S — 12 years ago
http://en.wikipedia.org/wiki/Screw_terminal#Multiway_version
Karl S — 12 years ago
you use a head gasket, available from treats or 1977, or you can cut your own out of copper or a beer can (use the search). Alternatively you could use sandpaper and make sure the mating surfaces are super smooth, and run the head without a gasket if the piston has enough clearance, but I can't advocate that method.
Karl S — 12 years ago
Someone correct me if i'm wrong but i'm fairly certain you're only supposed to run the top ring.
Karl S — 12 years ago
"Terminal Strips"Give them a call before you head out to be sure they've got what you want.http://www.radioshack.com/family/index.jsp?categoryId=2032289
Karl S — 12 years ago
Thanks Adam; for some reason I only saw "Russell" looking at your name.
Karl S — 12 years ago
If the clutch was jammed "up", meaning engaged all the time, then you should be able to rotate the flywheel and make the year wheel turn without pull the starter clutch lever.
Karl S — 12 years ago
Hey Russ,Did you have to make a hole in the underside of the frame near the intake so you could stick the wires from the stator into the airbox hole area, or was there a slot there already? Been thinking of doing this on mine.
Karl S — 12 years ago
Radioshack has them in 2 sizes by the breadboards and soldering stuff.
Karl S — 12 years ago
What about ladyboys?
Karl S — 12 years ago
someones got a bent pedal crank