Results 1–30 of 185
Is the doppler pully a clutched pully? I'd imagine it is since it has springs. Would you know if i could use this on a moby?
I gotta bring this thread back to life.With all this newfound free time on my hands, I started trying to really tune things up. Since i last spoke i found that i had an air leak coming from my variator side seal. Fixed that mess. Spoke to a guy that new a good bit about 2 strokes and we got things nice and dialed. A 50- or even a 60 slide in a phbg is a must if you dont want to run rich in 1/8 thr
Can we keep this tread going please. I have almost the exact same setup and the exact same problem.Ive been messing around with my phbg now for about 3 straight weeks and I'm sure my neighbors are ready to kill me and im just about ready to trash this carb.Setup:I'm at sea level or there abouts (California Santa Barbara low elevation)PHBG95 main45 idlestock starterw7 needle 2nd notch dow
I Spotted a guy the other night climbing old old San marcos road(1,100 ft elevation change) on his puch last night and it was bad ass! I never expected a little air cooled 2 stroke being able to do that with out over heating. If you are this guy i would love to meet up and go on a ride.
i have the stock spring but i cannot locate the little hook bracket, but as an alternate i have the doppler setup already so another spring isnt a big deal as long as its gonna help me get where i need to be
Any one have any experience with the Doppler yellow spring?
i should also mention that i have a kickstart and a kick start er3
Anyone have a good source for variator tuning knowledge?
Cool, Thanks for the help guys i'll remove the doppler spring and see how it goes. why all those weighs if you only need ligther ones?
Moped army, I'm having some issue finding information on how to fine tune my ER3. Its a full 50cc doppler build, Cylinder, crank, reeds, spring, 19mm phpg.My issue is that unless I run just 1 of the smallest weights on either side of the Er3 it will try on engage my belt at idle. Now if I run just 1 on either side it takes off normal but i cannot get the cheek to close and the bike never vari
I live in santa barbara now. Never updated my account
Hey I'm also interested in Moby stuff. Can you make a list of what u got
Hey I'm also interested in Moby stuff. Can you make a list if what u got
Whats up army.I was wondering if any one has used the doppler spring with the kickstart on a motobecane. Im thinking about using them together but I cant even find pictures of them on the same bike? Looking at the mounts and it dose not look like its going to be possible with out modifying the kickstart plate.
What's up guys. This is my old bike! I had the help of Austin of rouge builds help me out with this thing when it was mine. It's a solid build, but definatly not the cleanest thing you've ever seen. Over 60mph GPS varifyed. Pretty basic build with quality parts. Bump to get it a new home and keep it in one piece. Lots of old memorys here.
do you know if this would work on a tomos fork with the stock caliper location or would a bracket need to be made?
Whats up fellow pedders! My lady is looking to buy a vespa ciao and I'm wondering what model should we be on the look out for? I know that there is a duel variated (sp) model so I'm assuming we should be looking for this one? Ive only ever built puchs before but am in the middle of building a moby 50v for my self and I would like her to have similar off the line performance as me. Is thi
Text me if you want to ship 805 280 8737
Still got this and want to ship?
Just like the title says. I'm looking for a av7 for a cheap as possible i don't care if nothing works. I like the aesthetic of the engine and i want to use it as a peice of furniture. Not looking to spend more then 50 shipped hit me up if you got some junk!
hey im interested in just the engine but no flywheel variator or exhaust. id do 50 shipped.
dose anyone have any experience with the mbk kickstart?
i was hoping to see the build process. Ive built a e50 and za50 engine but never worked on any french stuff. Just wanted to have a model to work from.
Hopefully this thread still has some life. A while back tomahawk mopeds posted a video on youtube of his build process for a Doppler 50cc class. I cant seem to find the video anywhere I'm not sure if he took it down but if anyone knows what I am talking about and can get me back to it id really like to use it as a reference.
i found it! any one know if these will work with the kick start unit?