Results 1–30 of 439
Just Xtreme — 8 years ago
I don't have one currently, what would it improve if i installed one.
Just Xtreme — 8 years ago
i don't know why I would need or want a reed block?
Just Xtreme — 8 years ago
Do I need a reed valve?if so, WHY?
Just Xtreme — 10 years ago
what cdi/flywheel is that?
Just Xtreme — 10 years ago
tomato, tomoto
Just Xtreme — 10 years ago
yeap, sometimes you have to let your cock breathe a little.
Just Xtreme — 10 years ago
Thanks,I'll be there again next year at turn 6, i'm going to bring my new Pinto project next year too (i'm thinking bobber with knobbies).
Just Xtreme — 10 years ago
these were taking at Petit Lemans at Road Atlanta.
Just Xtreme — 10 years ago
I'm looking for tires for my new Pinto project, does anyone have anything local?
Just Xtreme — 10 years ago
no i'm not far from tampa.is that yours?
Just Xtreme — 10 years ago
idk, but overall the bike is in great shape.
Just Xtreme — 10 years ago
I picked up a new project yesterday, I think i'm just going to get some new tires and rebuild the engine with parts i have laying around.
Just Xtreme — 10 years ago
yeah, i was afraid of that. I guess i need to go through all my boxes of left over parts and see what i have to start with.
Just Xtreme — 10 years ago
i have a maxi frame, but thats about it.I'm thinking about making that my next project, so before i get started i was wondering what you guys think it would cost me.I'm not looking for anything too hot rod but something that has a bit of power because i plan on using it to get up some really steep hills.
Just Xtreme — 11 years ago
just want to get it to fire for now, the compression is crap right now.
Just Xtreme — 11 years ago
WTB Tomos a35 Piston and rings
Just Xtreme — 11 years ago
Thank you all for the feedback, I will work on it this weekend.
Just Xtreme — 11 years ago
I have the Dellorto PHBG 19mm black race carburetor with stock jets.
Just Xtreme — 11 years ago
First, I think it looks good :)From what i hear the timing adjustment on the cdi boxes are very limited. I did attempt to set the timing but like a lot of things with these mopeds there are always 100 different answers to a single problem.i did not adjust the jets yet or check the plugs, this will be one of the steps i take, but i came on here to get some input and create a list of things i need t
Just Xtreme — 11 years ago
yeah, I'm not the smartest person in the world when it comes to that stuff. but i do wear a helmet.
Just Xtreme — 11 years ago
Didn't really do much work but got to take her out in the wild.http://www.puchmagnum.com/
Just Xtreme — 11 years ago
I guess i can pull the plug, to be honest i'm probably pumping too much fuel in it, i swear i can feel it coming out of the carb at speed. I haven't checked the compression, everything is pretty much brand new. I can check it though.
Just Xtreme — 11 years ago
Hello all,I just tested my top speed on my moped and it's peaks out at 35mphI have a port matched 70cc kit with the cdi, It feels like it's missing at top speed. I thought the CDI would help stop that from happening?could it be my timing?I was hoping to get at least up to 40-50mph with my setup.any input would be great.here is a link to my build blog with other details of the build.http:
Just Xtreme — 11 years ago
I've taken my moped to the race track and there are very steep hills here, after one trip around the clutch seems to be sticking, would changing oils fix it? I think i'm running Automatic Tranny fluid in it now, any recommendations on what i should try.
Just Xtreme — 11 years ago
anyone have a set of magnum pedals for sale in Florida, i need them before next Thursday.
Just Xtreme — 11 years ago
it's the one on the right i believehttp://galleries.topgearphotography.com/Motorcycles/1989-Tomos-Bullet/i-5hXpRsc/0/X2/DSC7760-X2.jpg
Just Xtreme — 11 years ago
wtb stock kill switch Tomos bullet
Just Xtreme — 11 years ago
I would put a slot in the pipe to have a place to slide in the reel which would keep it from turning side to side
Just Xtreme — 11 years ago
$100.00 and there urs or u can just wrap the metal with a bunch of electrical tape
Just Xtreme — 11 years ago
Got a chance to work on the moped again and it's pretty damn close to being finished. w00t!My mini Mag Build Blog