Results 1–30 of 2076
Zac K — 5 years ago
JAY instead of buying shit PAY ME MY FUCKING MONEY!!!!Where's my money Jay Foyt? aka stackpoole
Zac K — 5 years ago
Instead of buying parts, pay me my money.Where's my money Jay Foyt? aka stackpoole
Zac K — 5 years ago
Where's my money Jay Foyt? aka stackpoole
Zac K — 5 years ago
Where's my money Jay Foyt? aka stackpoole
Zac K — 7 years ago
pipe?
Zac K — 7 years ago
speedo brackets
Zac K — 7 years ago
I have a Morini one sitting around. it looks quite similar. message for more info
Zac K — 7 years ago
any update on this? I need a belt and the one listed on ebay does not have the correct profile.
Zac K — 8 years ago
That box says "Escape W." That is the good Gila kit.
Zac K — 8 years ago
Ultra, super, hyper rare stuff there. Though some have multiple, I am still searching for 1. The closest I got was on that was $1400 in running condition but ugly.
Zac K — 8 years ago
looks like seal/bearing installation tools
Zac K — 8 years ago
Pic of the bike. Got it for $60. The plug hole on the V1 that came with it was stripped. Threw another head on it and it fired right up. Pulled the V1 to be put on an EZ Rider. I have a giant pipe I got from Ed as well that will be used on the XXXKE. I just have to make a spool piece to mate the kit to the pipe.I will have to look again to see what brand the kit is. I believe it is a 48mm though.
Zac K — 8 years ago
This is going on my Concord XKE. It will be some dirty porn.V1LHKS From ED.
Zac K — 8 years ago
Tri-ped Dave Wrote:-------------------------------------------------------> I think same crank as M1. This is basically an M1> with a variatorNope. The clutch side is completely different. It is longer and has a ground, flat land for the variator.
Zac K — 8 years ago
no location, no price.running?all there?$50, you pay for shipping to Michigan.
Zac K — 8 years ago
I currently have 6. 5 are accounted for...
Zac K — 8 years ago
The gyromat engine is funny. Some are 40mm some are 40.2 sone are 40.4. You will need to find a vernier caliper and measure to be acurate.
Zac K — 8 years ago
Daniel Metal Ponies Wrote:-------------------------------------------------------> I'm putting one on a Lazer... sorry of...>> http://i82.photobucket.com/albums/j242/exeoamor21/> 20130203_130059_zps1515bcee.jpgyou sexy bitch
Zac K — 8 years ago
Michigan requires no title for Mopeds, just registration.That is a $50 bike all day, especially in Detroit area.
Zac K — 8 years ago
They share almost zero parts actually. The piston will not work.
Zac K — 8 years ago
no lights. not legal anywhere.
Zac K — 8 years ago
You are #3 on the list Daniel. Safe, in other words.
Zac K — 8 years ago
messaged you back
Zac K — 8 years ago
Dillon Ryan Wrote:-------------------------------------------------------> Super cool. Are these equipped with vespa> variation devices?Yes. Only the belt is truly different. All other critical measurements are equal.
Zac K — 8 years ago
There will be a lot more of this, once I get my stock out to the buyers!
Zac K — 8 years ago
is the ball bearing still in the starter clutch? where the arm hits the starter, dead center.also, with the cover off, does the clutch bell spin freely without turning the engine over?
Zac K — 8 years ago
with your clutch cover off, check if there is clearance between the starter clutch and drive clutch by pressing on the starter clutch. Make sure it springs back and they don't touch when not engaged.If they touch, you have spacer issues.
Zac K — 8 years ago
working on it still. i have the belts in sight, i just need my contact in Spain to agree to resend them.
Zac K — 8 years ago
pics please
Zac K — 8 years ago
i need the electronics. how much shipped to 49680?