Results 1–30 of 74
Mark Dyer — 15 days ago
PMed you
Mark Dyer — 7 weeks ago
I Messaged you on Facebook and liked the post before any comments wereMade. I’m wanting to put these on a pinto? How do you take payment? I only have PayPal. $120 for the pair shipped correct? Thanksmortdyer@yahoo.com
Mark Dyer — 2 months ago
I need to buy a set of black pinto covers to go on my aquired pinto. Please let me know if you have a set you’re willing toPart with. Would also purchase just the left side cover if someone has that as well.
Mark Dyer — 9 years ago
I saw this and thought I'd share. Wish I had one!It's on Lincoln Nebraska craigslist
Mark Dyer — 9 years ago
I'd buy it but I can't travel to Minnesota to get it anytime soon. Any other ideas? Northeast Nebraska to Minnesota is is bit far for me right now, anyone have any ideas
Mark Dyer — 9 years ago
Do you ever travel towards the Nebraska direction because of its red I want it! I just need it to be closer !!!
Mark Dyer — 9 years ago
I am looking for a JC Penny pinto that is red/chrome and is original and not chopped up and modified and is located in the mid west
Mark Dyer — 11 years ago
bump
Mark Dyer — 11 years ago
Im new at this, I have an 09 Tomos sprint, i would like to make it go faster than 27-30mph, maybe around 40. Does rejetting, adding a 22T rear sprocket, and a biturbo exhaust shorten the life of your moped or is hard on it if its not originally designed to go that fast. Im not interested in kitting my moped engine but if adding these things will make it go faster and not shorten or damage the mope
Mark Dyer — 11 years ago
Im new at this as well, I have an 09 sprint, i would like to make it go faster than 27-30mph, maybe around 40. Does rejetting, adding a 22T rear sprocket, and a biturbo exhaust shorten the life of your moped or is hard on it if its not originally designed to go that fast. Im not interested in kitting my moped engine but if adding these things will make it go faster but not shorten its lifespan g
Mark — 12 years ago
How else besides running too rich a mixture does a spark plug get fouled up and wet. Im looking at buying a moped from a guy who has a 78 or 79 tomos. He said the spark plug gets wet and causes it not to run, but hes running the mix at 50:1 as is recommended. Sounds like it happens fairly often, I want to buy it but am wondering what else the problem could be. He also stated that he thought t
Mark — 12 years ago
Im looking at getting a moped but the owner says he goes through spark plugs quite a bit, its a tomos a3sp, any idea what could be the cause, he thinks it might need to have the carb cleaned.
Mark — 12 years ago
So this will be long but I have to describe what I've done so someone might have an idea of how to help me. My Motron Fairway took a spill. The things that had to be fixed were i needed to straighten handle bars, replace pedals and pedal arms, replace tires and tubes, and replace clutchcable.So I stripped the moped down to the frame to clean it up as it hasnt been cleaned by the previous own
Mark — 12 years ago
I want to do this myself, do you recommend getting it sandblasted or can i do it myself by just hand sanding off rust myslef?
Mark — 12 years ago
I need to replace my spark plug off a minarelli V1 engine and I dont know what the proper kind is, the one in it is a Bosch Super Plus WR8AC, I dont know if that thing is crap or not, The side that goes into the plug cap was nothing but a threaded stud when i looked at it. If that kind sucks, does anyone know the right size of a better brand like NGK or something. Also im missing one of the alle
Mark — 12 years ago
THANK YOU very much, you are very helpful!! I appreciate the information!
Mark — 12 years ago
Last summer I bought a well running 1980 Motron Fairway (yellow) for $150.I dont know if i was hosed or not, I also dont know anything about Mopeds so i just filled it up and rode it, It started good etc. The problems have arisen since my brother tried to ramp it on my wedding day and crashed on the road. for those of you wondering...yes I did get it on tape. The tires dont hold air and have lit
Mort — 11 years ago
I have a fully running 1980 Motron Fairway (Yellow) Id sell you for the upper end of your price range. Last fall it topped out at 27mph downhill and I weighed between 240lbs and 250Lbs. ITs stock with a minarelli v1. Its my first moped and has been very dependable. I live in Norfolk NE, and wouldnt sell it but I have to so my wife will allow me to pursue a red JC penny Pinto in the future.
Mark — 12 years ago
how much for the four blinkers? Would you have schematic for wiring them into a 2009 tomos sprint that didnt come with them.
MortI — 12 years ago
Is the price the same for both the red and yellow?
mark — 12 years ago
can you post another picture of the red one, the one you have isnt appearing for me. The yellow picture is though.
Mark — 12 years ago
It would be perfect for me if it was still stock and ran good, thats what I would love to have. Good luck with your sale.
Mark — 12 years ago
lets see a picture, is it red?
Mark — 12 years ago
I apologize but it needs to be a local pickup, im not going to ship it.
Mark — 12 years ago
Norfolk NE
mark — 12 years ago
Its the blue tomos in the picture, if your interested ill email some more pics that ill take today. It has some issues, it needs a new rear brake light assembly, it also needs a new tube for the back tire, and it could use a new throttle cable. It also make a pinging noise when in idle but as soon as you give it throttle it goes away. I cleaned it up a little and then it started easily, but i
Mark — 12 years ago
I need a petcock for the same moped, got one?
Mark — 12 years ago
Id be interested in the turn signals and tail light, send me a pic of them at mortdyer@yahoo.com