Results 1–30 of 325
I'll consider it if no one takes the whole lot.. but wit like a week and I'll let u know
plz just text me @ five zero eight eight six four five six one two if you are interested, its easier for me, but i will check MA once in a while...
im done with mopeds, i need a reliable car.... everything im offering is well over a 1000$ worth of shit, most of it is either brand new or within 2 months old... 900 is pretty firm, unless you have a vw golf you want to trade for...PHOTO GALLERY OF ITEMSFOR SALE: 1978 puch maxi (blue) *THIS BIKE NEEDS A NEW CYLINDER KIT*I WANT ALL OF THIS GONE ASAP, ***NOT LOOKING TO PART OUT BIKE!!!!***
hey will, thanks for the response, do you have any pictures? are they complete with brakes and everything i will need to just hook up and go? i have my own set of tires and tubes, so just the wheel itself is all i'll need... :)
looking for a puch 4-banger exhaustsome WHITE or BLK puch 5 stars that are complete and in great condition....and those goddamn black tomos pedal arms that treats nor 1977 can seem to carry EVER...
i have a maxi frame w/ a clean tank ive been trying to get rid of for the longest time, if you want it its 80 bucks and registered til the end of the year... i have the sticker in my wallet right now...
would accept a trade for a few of these items:stock puch flywheel in great condition27 x 1 1/4" road bike front wheel for old bicycleblack tomos pedal arm setpuch maxi compatible complete set of white 17" 5 stars.. (id give you my spoked set)cmon lets be jolly folks..
only selling locally. if you're close enough to come pick it up, you should do so.. tank is in great condition. this is just the frame, sport rack, and chopped seat w/ all registration paperwork valid til dec 2013.. buy this for a future project pweeze? i need to make room in my garage or my landlord is gonna kill me...dont have a pic right now but it looks great and the seat im including loo
so i bought one of the simplified stators off of treats a few months ago but the coil/condensor failed on me, looking to buy one of the good bosch ones that came on old sachs/peugeot mopeds rather than just buying another chinese WAT YONG one that will probably fail me in another two months... please dont suggest me to just buy an external coil, the whole point is too clean up the bike and simplif
hey, im on the hunt for some hi-quality .flac audio, and none of the major sites (demonoid, tpb, etc) have what i'm looking for. plus they are super sketchy nowadays with them being all public now. im looking for some private trackers... if anyone has an invite i can show you my lackluster demonoid ratio, but promise to seed since it'll be on a private site and i wont have my ISP up my a
Yes it looks like that. Points onthe left, condensor on the right, light coil on bottom and internal coil on top.. Likd i said tho, my stator isnt stock, so my coil is a little bigger than the stock one cuz it has like a plastic covering over it.. But yeah regarding the woodriuff key, im pretty sure its in the notch on the crankshaft andthe notch in the flywheel went right over it makin a proper &
Not likely.. It only goes on one way any other way and the flywheel hits the internal coil this is y im so confused.. It seems like that stator needs a good 90 degree or so rotation. But wen i had the stock crqnkshaft on, the poits opened at the rigttime. I cant rotate the stator that much tho cuz the wires only go so far...
Mars i already said that i am getting big blue spark. Thats not the problem. My issue is that the points areopening at the very wrong time. Reread my posts for more details..
well you can rotate the stator plate just a small amount but nothing substantial like a 90 degree turn or 180. the flywheel is magnetic and the cut out holes in it are sorta too small to get ur hands in. so screws and screwdrivers get stuck to the inside of the flywheel and its just a pain in the dick.
am i correct when i say that there is a notch on the flywheel end of the crankshaft that the points cam is opened by, and that is why its firing at the wrong time? and mars yeah i meant to say a little before tdc, i was just generalizing, my fault.i've put the stator in full advance, full retard, right in the middle, opened the point gap to various gaps and still no go. before i rebuilt the e
so i rebuilt my e50 with new bearings seals and a new performance crankshaft. it wont start because the points are opening just when it changes direction from bdc, then they close just after tdc. im using the same stator plate from before i rebuilt it (the simplified 3 wire plate from treats), and my guess is that the new crankshaft is opening the points at the wrong time because the nub that his
Well i wouldnt say my jetting is crazy off, theres others like me on the tuners spreadsheet running a 90main, ill try an 86, and continue messing with timing. Will fill u all in if i get it running.
rebuilt my e50 w/ a new crankshaft, seals, bearings, 70cc airsal kit, 50cc hi hi head, ngk b7hs, 19mm phbg (60starter, 42idle, 90main)i have bright blue spark when i test the plug on the cylindercompression is 170psibike has fuel w/ proper premix of 30:1 for break-inonly other possibility i can think of is timing. i set stator to full advance and used the sparkplug box as a gapper for the points (
just UL'ed some pics showing the damage to the head, the minor scuffing inside the cylinder, and everything included w/ the frame. note the registration paper and green registration sticker. sport rack and short seat are visible.. theres a little rip on the side of the seat, but its minor.. still, a great deal. no tailight assembly on the frame, but i do have the black/chrome headlight thingi
Why dont you just buy a spst switch at radioshack for 3 bucks and wire it yourself? Ud save a lot of money/time that way...
Need this stuff gone:1978 puch maxi frame - registered to me til dec 2013- will include chopped short seat- tank in great shape- sport rack w/ frame rails- metra65 cylinder (needs minor honing)- beat up puch 50cc hi hi comp head (try to salvage it?)Ill do 100 firm to the first one who picks it up at my house landlord wants it out of the garage.. Email me at davidbelanger86ATgmail.com for fastest r
I have a The exact same cylinder ive been trying to get rid of for weeks.. Ill do 30shipped, just needs minor honing.. Pics later wen i get outta work.. Email me @ davidbelanger86ATgmail.com ill respond faster..
seized my metrakit, these are discontinued and i need the full piston kit and matching the gasket kit. anyone wanna help? if not, theres a lightly seized metra65 cylinder up for grabs, make an offer... i'd really like to reuse this though...
hey max, before you move cross-country, i know you have that e50 you still owe me right? if so, can you please drop it off at stingray tattoos and leave it for "josh torres". i know it sounds shady but he'll grab it for me. and i could use the engine... thnx. and good luck on selling your bike, that thing must be mint.
i have a registered 78 maxi frame w/ no rust. i can throw in a chopped single seat, a sport rack, a tecno boss pipe, and someone owes me an e50 out in boston (where you are)... i'd do 300.. but you prob arent interested anyway, just my .02 cents.
they are discontinued so this is the only other place i can get these. someone help a brother out. the ones im looking for are the stock sized piston: 43.5mm and retail for 55$ on treats. the gasket set is $13... make me an offer..
just a few more pics to hopefully sway your decisions... lol.
trying to raise money for a new build. pics included.*1978 puch maxi frame (champagne) - great tank, reg. til dec. '13, nice paint*tecno circuit w/ missing baffle - loud as shit but runs much better w/o baffle*chopped puch short seat - sits wayy low on frame, little rip on sidesome other stuff i want to sell but am sure no one wants:*seized metra65 - very salvageable, just needs a good honing
tccd isnt the same as k-star. tccd's transfers are bigger than the k-stars, plus they are 2 diff companies, i'd trade you my used metra65 cylinder and used puch head for it + cash... or a circuit pipe... i only ask cuz i have those parts on hand, and you're just gonna have to pay shipping anyway to ship it back to treats, then spend more money on an athena... lemme know if ur intere