I got a 02 Tomas hitting 63 right now we got a 70cc kit on it drilled the back sprocket for the smallest one we can find and then found the biggest front sprocket and did a little chain and case mods then slapped on little bigger carb on it and now it fly's now I did tighten the front frame nut to keep the DEATH wobble down and put about 3lbs more air in the tires and then HOLD ON
Points check them clean them and check to see if you spun the flywheel key causing intermittent spark
Points check them clean them
rebuild the clutch there are links on how too in here its real easy. your clutch is made of a cork when it wears away you start getting bad slipping and shifter shack on tomos about every 1000 miles rebuild and always always pedal when you take off that's a big part of them eating up clutches.Get is fixed soon if the clutch lets lose the spring and plates that hold it all together will break
sounds good I will check the cranck seals the smoke that blow's out smells like 2 cycle oil it oil injected I will look at the pump again
I just put in new reeds and rings in this 02 Tomas due to the fact it was smoking and running weird I found the reeds were wore out and the rings (70cc kit) got it all back together and still smoking like a train... any ideas ???? but it is running a little better just wont go as fast as before
How many miles does it have? I have done 4 clutches on them the same year as yours with about 1900 miles on them with the same issue and rebuilding the clutch fixed the issue if that does fix it I tell them to pedal when they take off from a stop it will make the clutch life go longer it may not look as cool as just taking right off but hey less maint on the ped O and change the tranny oil about
CLUTCH I say it going out when they heat up the bad clutches seem to real sluggish even jerky
K will do I went and took a measurement of the main shaft the clutch sits on its a little forward I think that's why when I put the cover on it. It then tears the bearing out unless I am missing doing a step putting it back together I was just wondering if anyone has had this same issue.
I have a 96 a 35 Tomas I had to replace the clutch because it was blowed everywhere so now when I have put the case back on and all the washers it has shreaded the front case bearing twice NOW!!! could the clutch shaft of gotten bent ?????
I change my clutch in our 96 a35 motor and now it keeps shredding the front case bearings I have all the washers back in place anybody ?????
got any campus 50 parts ?
I am looking for a A55 motor no head or jug needed. I just need the tranny with clutch and rod maybe piston if you got one shoot me a email ASAP!!! I live in Piqua Ohiotglucky3@aol.com
I have a OLD puch Sears campus I live in northern OHIO I am looking for more mopeds just like mine for restoring mine and even another to put together and restore shoot me a email firstname.lastname@example.org