Results 1–30 of 1959
start off with a new spark plug, NOT a new main jet. start the ped, you must run it at full throttle for atleast 1/2 a mile, hit the kill switch, then pull the plug to see the color of the ceramic. you CAN'T slow down, let it idle/cool down before you pull the plug. it will not be accurate.kelly what is the size of your jet now in the bing? you want to buy atleast 2 or 3 sizes bigger with tha
bullet. Please try, and do a search for these types of questions. This is talked about atleast twice a month.
get the techno pipe from mopedwarehouse.com, and upjet.should give you 5-7 mph more.
from what he said it didn't effect much at all.
you can try asking on scooterbbs.comthey should know all the performance sites.
plug chops are the best way to tell, instead of guessing.
why not use a 14 or 15mm bing on your magnum??i'm not familiar with the amal carbs, but the dellorto's are nice.
call him. he has tons of performance parts.
mopedwarehouse.comikesbikes.comhandybikes.comyou might have to call them, and, or post on their site.
did you read your other post??http://mopedarmy.com/forums/discuss/7/12764/12764/
READING SPARK PLUGS and JETTING and PLUG CHOPSTwo stroke engines are sensitive to the level of heat inside the engine.The main jet size in the carb is the main determiner of how hot the engine runs at wide open throttle.Too hot and they will seize the piston.Too cool means they are not making full power.Engines get the hottest when they are running at wide open throttle making maximum HP."Rea
you won't get illegal speeds with just a pipe, and carb. you would need to kit it.for now get a performance pipe, upjet, perform plug chops, and get yourself a 14mm bing carb/intake.
good info kyle.try here for porting two strokes:http://dicevideo.com/forum/moped.htm
"If 2 speed a spacer will need to be fabricated and installed between the cylinder and intake. (we will be offering a spacer for this purpose in a few months.) "you better hold one for me guru......i need one. ;>)
you can also post on his forum.mopedguru.com