Results 1–15 of 15
also i was just at treats and i could not find it?post a link?
so a k-star kit from treats is a good match for the A-3?does it come with the bushing or did you get that seperate?t8
is there any kit that the 12 mm wrist pin bushing is included?maybe link us a kit that is all included?how about a link for the bushing?recommendations on exhaust? and carburation?just looking to kit my A3anyone that has done one, please help!looks like i'm not alone in this endeavor.thanks again,t8
Just picked up a '77 tomos A3SPthis bike could use a kit and i am wondering if anyone knows of one that would fit.thanks guyst8
thanks to everyone that helpedproblem slovedt8
i could do that,is it the whole carb or just the top piece?i can send a pic of what we have here.....thanks mant8
so we rebuilt the clutch and that is not the problemit will turn over a few times then lock upwe go inside, turn the bolt to turn the engine over and it frees up againthen same old storyit will let us kick it for a while then it freezes unexpectedly again.decompressor works fine as wellthis is super puzzlingwe had it running for a bit now it seems like it is not getting sparkhow hard is it to mess
need the top to a 12mm bing carbany body parting out a bing?got a spare bing because you put a big bore kit on your sachsplease let me knowthanks guys
i believe it is engaging it, it presses the button downand there is no pedal brake from what i have found.as soon as you pull the lever the pedals stop and no amount of force will get it to turnmore ideas?
that pic helps alotwhen we opened the side up the spring was in the middle pressed between the top and bottom of the arm, i am thinking someone who did not know what they were doing put it back together like thatany idea why it would turn over so well one day then be stopped like this the nextwe can turn the motor over so it is not siezed but when the lever is pulled the pedals stopthanks again yo
anyone have a picture of the inside how it should look when properly installed? better yet a video of the inside operating properly?the spring is just floating from what we see, are you saying the round eye should press against the side plate? how about a good place to get a manual?the manuals i have found say some 504 engines and all 505.the cable is not broken side plate has been taken off of th
this is for a sachs 504 motorthe motor hasnt run yet but was turning over finewe drained the fluids and now it is some kind of stuckwill a sachs 504 not turn over without the fluidsis my next step to replace the cluch?when you pull the decompression lever the clutch lever wants to move on the inside but doesnt appear to move anything, there is also a spring that appears not to be cliped to anythi
wondering where they stash the key?we haven't completely removed it and put it togethertook out the parts box with pedals and mirror and looked under seat.it was not in the parts box or under the seat. is it wrapped up in the controls?it is a 2009 and it just came this morning.thanks
Looking for mopeds in the pittsburgh area.will consider in any condition, looking for a winter project, but not a restoration.Any and all information is appreciated.
anyone know where the vin islots of numbers but it is in yugoslavianneed a handt8