Results 1–30 of 33
Old post revisited....Does anyone know how much needs to be cut off of the Moby head tube for a Maxi EBR fork to fit?What sort of mods need to made to the Moby brakes to make this work? I can't switch to a Puch brake hub because I'm running 12 star Moby mags.Thanks...
I know that certain bmx headset caged bearings will work in a Magnum. Does anyone know a source for a bmx set or know that measurements that I need to ask for at a bearing house?Thanks,,,
Could I get the 12v coil from Treats and use the semi marker which is 12v so it's bright? The Treats description suggests using a regulator...? Would I have to run a battery like suggested above to use the 12v coil?
Before I get scolded, I know that this isn't a performance question per se but this is obviously the forum to get reasonable technical answers without having to read through chicks with dicks or music posts on the general board. So...I'm working on a cafe-ish project with my Magnum and I need some tail light advice. I'd like to run a LED tail light either mounted under the seat or
Would I be able to keep my kickstand on a Magnum with a Proma?
I'd probably lean toward more low end because living in a city, being dog ass slow at lights really sucks. So.... low end with moderately improved top speed.
I haven't gotten my bailout money yet so nigguhs is broke these days. So buying both isn't an option...
Since you all have opinions that you love letting else know, I'll make the mistake of asking them....E50 case matching with a 65 Metra and 19mm carb...Homoet 6P or a Proma Circuit?Pro's...con's?Let's here it.
Actually Dean, I did search before posting the original message. All of the other posts just discuss using a Magnum swingarm for a larger tire which I was already very clear on.What I asked was, do you have to use a longer rear shock to accomodate that change in swingarm because I was under the impression that Maxi's had shorter shocks than Magnums. And I also asked about any other factors t
If I was going to put a Magnum swingarm on a Maxi to be able to run wider tires, would I in turn need to also run a longer rear shock? Anything else I would have to think about to make this work?
Is there any difference in the E50 engine cases between the 1, 1.5, and 2 HP models? I'm just asking because I'm going to be building a motor with basically all new parts except for the case. Will building on a 1 HP case matter?Be gentle. I'm new to this world of building.
Treats sells both a 50cc and a 70cc model. The description claims that both can be used with 65cc Metrakit. Someone please explain the difference with advantages and disadvantages.Thanks.
So I was following the instructions for tank repair in the wiki and I've got a question about one step. It mentions using rubbing alcohol for drying the water. Does anyone think that denatured alcohol would be better for a faster dry? Would it screw anything up etc? Any thoughts?Thanks...
Alright....do you remember that Maxi project you were going to build? Yeah the one before the Derbi and before the Hobbit and before the Pinto and yes even before the Magnum that you built....I need a Maxi frame. I don't need forks or swingarm, just your frame with a CLEAN, RUST FREE-ish tank. I don't even care about the color. I'd like one priced to move because, you know, the r
I need axles for a set of Motobecane Le Moped 12 Spoke mag axles. I measured them and I think they're 8mm which doesn't right so feel free to correct me if I'm wrong. Got a set or some that will work? Hollarrrrrrrrrrrrrr...........Thanks,Marc
Does anyone have one that they would like to part with? You know it's just sitting on that shelf in your garage. You know you're broke and need money for rent or weed. Sell it to me.... Love you.
What ever happened with these? Were they ever made?
The title should have said stuff.... crap.... but maybe not gear.
Help a brother out. I know that someone out there has one for me.
Damian... Return my e-mail when you get a chance.
Damian.... E-mailed. Get back to me.
I need the plastic side covers. Anybody? Anybody?