Results 1–30 of 619
I need them. Home Depot, Ace, Advanced and all other nut salesmen have not had them. Life is frustrating.Thanks
There was a black Avanti super sport posted on craigslist awhile ago; Someone stole it from my friend while he was out of town. Does anyone remember this ad being up or who was selling it?
I needed to put new transmission fluid in my E 50, so I went to the auto parts store and bought Castrol brand transmission fluid, later realizing it said for use in Ford vehicles...Is this alright to use in my moped?
Thanks, Wasn't aware that they had breather holes.So, what fluid should I put back into the moped and where?
I leaned my maxi on its side in order to fill the clutch case, and a bunch of brown liquid spilled out of nowhere. I couldn't find the source but I'm guessing its somewhere around the back of the case.Any ideas as to what this is?
hopefully the first off topic buy
I've been edge for a while now and completlly agree with you Derek
Huh? The intake is wider than than the intake port on the cylinder. However it all bolts up fine.is that what you mean?
Im putting a 16.16 carb on my stock maxi cylinder. Do i need to port my intake port to 16mm in order to prevent bogging or will it be fine as long as its jetted low enough?
TFR are alright, I think I would have been better off not getting one as my first moped becasue1. The carb is not a real Dell'orto, Its a knock off thats prone to not working mainly with idling.2. In the cold weather the belt has trouble sticking thus you have trouble moving3. LOCK TIGHT YOUR CLUTCH because they will fall off.Good luck and have fun!!
Good point coco, I did get it from Jae and am really anxious to ride it but I have no plates here in florida.
Bianchi Snark with a minarelli engine.What should I do to it? Any suggestions would be amazing!
will it do harm to your engine? It burnes pretty hot(at least hotter than diesal) whouldnt that make you seize?
im drilling out my carb(to a 13.13, Dellorto SHA) and intake value on my kinetic TFR. I have a 53 jet in now. After I drill, what size do i need? With all that Im gonna get a caio estoril exhaust in a few week. What would the size be with that?
can you run a moped on kerosene? i thought it was similar to diesel.
i just bought a vespa high flow air filter for my kinetic and it wouldn't fit on. The hole for the carb was the same size it just seems a tiny bit to big for the supframe?Anyone know how to manage air flow well with a 55 jet?
what is a good clutch for a TFR?
will that fit on that ped?
Ya ill just reset the timing.No changes to anything like that- just all stockthanks for the help
Ya I know mopeds suck like that but its running excessively slow even for a moped.Timing maybe?
Im working on a Moby 50 v and it loses power when going up hill. Does fine one flat ground.any ideas?
gotcha,Both of the seizes happened at either WOT or no throttle.I'll make sure to fix that.
can an open carb facing forward cause a soft seize if going fast enough?my minarelli has soft seized twice going down hill
the front of the piston was really dry as well?
Make sure you don't pick mopeds that are excessively hard to put back together. Puch stuff is pretty easy, so is minarelli.
there is definitely scoring on the cylinder and piston however there is no ridge. Maybe a tiny bit of metal transferring?what else could be making it lock up like that?