Results 1–30 of 116
Dylan — 12 years ago
hey i was wondering if the a35 crank on treats would fit in my a55. this 1 http://www.treatland.tv/tomos-moped-racing-crankshaft-p/tomos-a35-crankshaft.htm thamks hope yall know
dylan — 13 years ago
friction material seems to be the most practical i used jb weld and havent had a problem with the pads coming off, I did score the clutch pretty deep so that the weld could get really good grip.
Dylan — 13 years ago
I kitted my tomos last summer and i blew through the stock pads in only a few months. i was wondering if anyone has found a material that would be able to hold up to the torque of a kit? i've treid rubber which just slipped way to much and the pads ended up flying off. so any help or sugetions would be much apriciated.
D-rock — 13 years ago
could this be done if so how?
D-rock — 14 years ago
hmm treats has a box might have to get it
D-rock — 14 years ago
how can you either take it off or just get higher revs?
D-rock — 14 years ago
naw its just hitting a tiny tiny bit the bearings are brand new thanks man off to work.
D-rock — 14 years ago
my piston skirt is slightly hitting the case is it fine to grind down just a smidgit?
D-rock — 14 years ago
well i guess the only way to find out is to try
D-rock — 14 years ago
so hows this kit all around and as far as speed is it fast kit?
Dylan — 14 years ago
shoulda got the sprint oil injection belongs on scooters not mopeds
Dylan — 14 years ago
thanks looks sick man love the hed lights
Dylan — 14 years ago
what carb are you running
dylan — 14 years ago
thats wat i thought someone siad it might have one but didnt
dylan — 14 years ago
is there a restrictor plate on the sprint a55 jus wanna no before takin it apart
dylan — 14 years ago
the biturbo is cool and cheaper but hs bad build quility ima get a tech for my tomos.
dylan — 14 years ago
its a dell? weird k thanks guys
dylan — 14 years ago
were can i find jets for my stock carb cuz i got a air filter and exhaust and wana put them on but need jets
Dylan — 14 years ago
i dont think the needle itself will make much of a differ id change the needle jet
D ROK — 14 years ago
gezelles mine a still on back order:(
dylan — 14 years ago
were can i get a new needle jet?
dylan — 14 years ago
yea wen you give gas it stays runing
dylan — 14 years ago
thats what i feared. do i just go around all the gaskets with carb cleaner?
dylan — 14 years ago
alright here is my setup....70cc athena port matchedbiturbo14mm intake bored out 12mm bing 66 main jetuni filterever since i put the athena kit on my maxi it hasnt idled. the only time it idles is wen i first start it, after i rev it up then let off the throttle it dies. ive pretty much have tried everything and am getting extremly frustrated. please help me pleeeeeeeaaaaase
dylan — 14 years ago
so found these online really cheap anyone use them? there fakeke dellortos. do real dellorto jets wrk in them?
dylan — 14 years ago
so found these online really cheap anyone use them?
dylan — 14 years ago
i dont think my exaust gasket has sealed yet and mabye im loosing back pressure? and yea ive tried the idle screw and no dice in that department. ive got a 12mm bing bored out to 14mm with a 66 main jet which i think is a bit small but my plug is black so its a bit to rich.
dylan — 14 years ago
well i just put a 70cc athena kit on my maxi and it wont idle at all any suggestions.????
dylan — 14 years ago
thanks thats what i figured
dylan — 14 years ago
is the arrow on the piston suppose to point up or down im pretty sure its down.