Results 1–30 of 43
Can I use one of the overhall kits? I'd like a whole new cylinder head, because my exhaust bolts have been sheared and are stuck into the current one. If so which one do I need for an FA50?Here is the link.http://www.discountscooterparts.com/rebuild_kits.htm
I've heard that you can get more power out of your ped by simply getting a larger cylinder or somhow extending the cylinder block and bolting it back on. Is this true? I have a Suzuki FA50 that I would like to get a little more power out off, any ideas?I could also use parts for this ped if anyone has any...
I have a C70 as well...this week i have rebuilt the carb, cleaned out the gas tank and put new fuel lines on it, and during my first ride of each day it will run like a dream.Then, when i try to stop about 20 minutes into the ride it will die and won't start unless the bike is on full choke and full throttle....Any ideas?I was thinking it may be the dead battery- but really it acts like it is
Thanks guys,I will tear the carb down and see what i got...I figured i could be heading that route when i could find no fuel regulator on any parts site...Interesting thing happened last night after having the fuel off for a couple hours...i turned the fuel to on and you could hear it suck fuel into the bowl...like intense rush of fuel that you could see run through the filter....Thoughts on this?
So,I have a beautiful passport, but i believe s0meone has removed the fuel regulator that would come on the fuel line right before the carb... i placed a small fuel filter there to help slow the gas down, and it helped, but when the ped is running with the fuel on completely, it will eventually sputter. I change the petcock to reserve or off while riding and it smoothsback out for a bit, until it
Ring cap?If you mean ligning up the open areas of the rings with the arrow on the piston, then yes...
Bought all the parts i need for my ped...new everything...sliding the cylinder head back on, and i can't compress the rings enough/ get the block to slide over the cylinder...any tips? someone said to just squeeze the rings together and slide it on...yeah...not going to happen...Also, i broke one ring somehow...can i replace it easily? or are rings specific to peds...PLEASE HELP>..
Any tips?How do i compress the piston rings? Do i need to know any thing before i slide it back together and tighten the bolts?
Great! thanks for your help...i will give it a try...
I am trying to remove the cylinder of my FA50 and i have the four bolts off and the head off, why wont the cylinder block slide off?
Hello All,I just picked up a new to me Suzuki FA50 (1984). I have found that the exhaust/muffler has come detached from the cylinder block. The bolts have been sheared off into the block, and before i go through the trouble of using a tap and die, i would like to explore just finding a new block. If anyone has one please let me know.I may also be interested in a new rear wheel...Thanks for any
How far are you from Louisville? Do you still have it? I am very interested.....email me email@example.com
Hey,I am not sure if i ever road with you...used to have a Pa50-ii, a passport, and shuttle, a talon, etc....welp, i SOLD everything. now I miss it.How much?I have a honda 90 (Motorcycle) that runs, but need a little work....Would rather just pay cash depending on what ballpark you are in...email me...could take a look whenever...also if you know anyone else selling ANYTHING that runs I may be in
I am selling or trading my prestine 81 passport for something that is 50cc. The passport is 70cc 3spd clutchless transmission and will run about 40-45mph.I do not have a title for it, but am only the second owner. I do have the original sales receipt and registration receipt.I need to get $800 to actually sell it, as they go for much more on EBAY. I am selling cheep because of the title. I hav
Hello,I need to purchase two tickets for Germany. So, I may be selling my two prized possesions- a very very clean '81 Passport (70cc, 3 speed) and my honda hobit (red in color)Both bikes are at about 3500 miles. They both run amazingly well.The passport will do 45 or 50 down hill. 45mph with two people on it.The hobbit does about 25.I know what these bikes are worth, and I am still hesita
I would be interested. Please email me more details....I will respond to email with pictures.
I have a RED PA50-II....some kinda of urban myth about yellow and black I guess...Just in case someone offers to sell the bottom end of a red hobbit..
I am sure it is a PA50II....not sure about the yellow black thing...i have a yellow parts bike that is a 79 i will throw in with the deal...this is a 1982...it says PA50-II on the vin badge. It is read with black parts (bars, chain housing etc)...Pics to come soon...
Hey Everyone,I aquired a red 1982 Honda PA50II this weekend. It runs like a top, is decent on the eyes, and has 3200 miles on it. Starts within 10 feet when pedaling.I am in search of anything top tank that runs and rides. I have a Passport and love it, and really like the hobbit too...but top tank models just look cool to me.Any offer will be considered.Madison
Hello,I am selling my 1984 Suzuki FA50. It does run, however i currently have the front end apart replacing gaskets. I am selling cheep because i have found another ped. The only thing this one needs is a new pistion ring, all the other gaskets i have brand new and ready to install. If you like, i will order the rings, install and sell complete and running for 300.It is one of the cleanest FAs
Hey Everyone,I am very close to completeing my Suzuki FA50 project. All i need now is a cylinder block and exhaust bolts (mine are sheared off into the block)...please let me know if you have one you are willing to sell...
Need the cylinder (if my exhaust can easily be bolted into it, mine has sheared bolts in it:().Price and shipped to Clarksville IN 47129?Could also use complete rear tailight/turnsignal set up.Please email me at firstname.lastname@example.org.Paypal?
It is gone, I tried to buy the same one. Check 502 street scene too. Got mine from there for 175 bucks running.
yep,Need a cylinder head, mine has the exhaust pipe bolts sheared off into it...looking for rear wheel as well.Could be interested in anything.-Madison
Anyone have any moped they would be willing to sell me? I live in louisville, will drive up to two hours away. Looking in the 350-500 price range.
Yeah, i havnt done anything to it... I know it is a 50-II....Havnt even looked at the plug yet...or the intake...