Results 1–30 of 86
The points are properly gapped. I will check the fuel flow with the bowl removed. There was gas in the float bowl when I took it apart.It is a new carburetor. I will have to look for the vent hole. I am not sure where that is.Thank you
I have a new 15 bing and rebuilt e-50 engine which has good spark. Fuel is flowing to the carb. If I spray some starter fluid in the spark plug hole, it starts for a second. Cleaned the carb but when I remove the spark plug, there is no fuel on it.Any suggestions?
I have a rebuilt E-50 engine with a 5 wire stator. The wiring harness has a blue/black wire from the horn going into the wiring block. How do I handle that?Thank you in advance
As long as your check was cashed, you should be fine.
Yes, by tag I mean license plate. I am sure the sticker will follow soon. On the last one I did, the Vermont DMV did not put postage on the envelope with the tag so it was returned to them and then they resent it with postage. That license plate was received at least 4 weeks after the sticker.
I have done 3 registrations in Vermont. I receive the sticker/registration a few weeks before the actual tag.
I tried this:https://www.staples.com/uni-Paint-Markers-Medium-Point-White-63613/product_501007Oil based paint sticks well but comes out too much at a time. Looks good from a distance but up close the paint is not even. Too much in some places and too little in others.
Last year when Covid hit, I had already paid in advance for a full restoration kitted and powder coated Maxi. I did not contact Alex for months because I was not sure what to expect. Frankly, I thought I might be screwed. I waited a few months because I knew Covid was bad in Detroit. After a few months, I reached out to Alex. I received my better than new Maxi from Alex and his crew and I cou
Before I was "aware", I sent an engine to 1977 to be rebuilt. Paid the fee and shipped it UPS with tracking. The only thing I got was lies. Fortunately, I made it a mission to dispute the charge.
Thanks Mark,I bought the rivet from treats but it is not a pop rivet. Can you send me a link/picture of the rivet gun that you used?
How is the fork locket rivet for Treats Maxi fork lock installed? Hopefully, someone can advise how to install.Thank you in advance.
I have purchased the above lock and the first time I used it, the key bent. Maybe the lock is fine and I just need to get new keys made before I use it.
Looking for a NOS Puck fork luck and key set.
I understand, just trying to get the best mirror possible for my Maxi. I don't expect my 77 Maxi to perform the same as my Grom.Thank you Tri-ped Dave
Yes, my Honda Grom mirrors dont vibrate
Can anyone recommend good quality mirrors for my Puch Maxi that will fit through the stock Magura control hole? Looking to find one that will not vibrate when riding.
Amazing what good tools can accomplish..Bought a Park Tools cone wrench and that took care of t
I am trying to clean and regrease a Puch Maxi spoke rear wheel. I have a spanner/thin wrench made for a bike to put on the cone nut and a 19 mm deep socket for the outer nut. I can;t get it to come loose. I have sprayed it with PB Blaster.It's difficult to hole the spanner/thin wrench and turn the socket wrench at the same time since the spanner wrench is not that long,Any recommendation
He embroidered the Puch logo.
Received my Maxi Sport seat from Dan yesterday, Great work.
I sent one in about second week of June. Check cashed after about 6 weeks. Received the plate a week later and the sticker/registration another week after that.I also did one in March the same way but it came back with a request for an inspection for some reason. Never received the plate but I did get a temporary tag and registration which I was able to use to obtain a tag in Florida.
Hi Dan,I would like to send you my Maxi Sport Seat. Please provide delivery and payment instructions.Christian
Thankfully, I was able to take the registration from Vermont and obtain a Florida tag today. No need to deal with why I received a 60 day temporary tag from Vermont. It got me what I needed.
I think I will mail in another batch of photos with the letter.