Results 1–30 of 174
I put alot of time and money into that puch and I loose everytime I go to work on it. I end up getting pissed off and needing new parts. But anyway. Right now it wont run past 10-15 mph with an 18 /40 gearing. 15mm amal carb with 55 jet proma circuit 70cc eurocylindro speed crank with new bearings. As soon as i let off the gas it stalls even when im rolling at 15 mph?!? It doesnt make sense to me.
yea some guy from california won the auction and he never came and got it or tried making any arrenagements so its up for sale again
Do they have titles, do you have pictures. Its hard to get that much money without a title and not even showing a picture. is the puch two speed or one speed.
Beautiful Puch Mopedhttp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=88433&item=5572509752&rd=1Snowflake magshttp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=88433&item=5572506528&rd=1
These mags are complete and in great shape. brakes axles bearings all there and functional. 80$ obo.email me at firstname.lastname@example.org
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3181363103&indexURL=0&photoDisplayType=2#ebayphotohostinglook at that beautiful moped!
I have a set of puch snowflake mags for sale.... I am asking 70$ email me if interested
yea i am going to try and get a title for mine.... I hope i have any luck :(
you probably just ruined the cylinder then.... I made that mistake once I got a rusty cylinder and thought that some oil and emery cloth wouldnt make a difference... but when we finally put it together it had almost no compressions at all
the puch engines cost 25 at the most insured to ship....
I need a long seat rack for a puch... because if i cant find one I have no seat because I threw my old one out when I got the long seat.
You could probably make an easy 200 selling that off ebayI saw a non running 1980 newport with neither chain and rust in the tank go for 300.
ike and mopedwarehouse both have side covers....
could you send me a picture of the front fender and a price... email@example.com alot
stainless steel as in chrome and are they in good shape?
I have a jawa motor for sale....300 miles on it and ill throw in the carb and intake and muffler40 dollars plus shippingoff a 1976 jawa transistor 40
i thought i needed a gasket for the carb to then i realized that i wasnt tightening the bowl all the way... I *think* its a 14mm ratchet and just turn it half a time after youve hand tightened see if that helps...
so it works but there is no carb... did it just fall off or take a walk?
where did you get a replacement coil for it?
so nobody knows anything? so much for good help
Yes its all there and all original. It moves up and down but then what? any ideas on troubleshooting??
Someone please tell me how this choke works so I can fix mine. I do not even understand the design. Its a cable choke and its got a little gold body, and where it goes in the carb, its a very tight fit. So tight it seems that when you snug up the top nut for the choke on the carb the little gold body has no room to pivot? and at the bottom of the chamber where the gold body sits there is a very sk
the other thing is the choke has no effect on anything, and I believe I put it back just the way it was. Not that I get how this choke is set up.
it runs the same if it idles for 10 minutes. I just went outside and adjusted the clip on the throttle body, put it all the way to lean...nothing all the way to rich....nothing. The main jet is clean as a whistle. I did not remove the emultion tube though. Thought I sprayed plenty of carb cleaner and compressed air through there. Infact I cleaned this carb three times. maybe I can try that tomorow
I got a suzuki fa 50. I am fixing it up to use it as a daily driver. And It has a big time running problem that I just cannot figure out. The bike starts on the first kick. The engine runs and idles smooth however when your taking off from a stop it doesnt like any gas at all. From what I can gather it seems like its getting way too much air at idle. When you give it gas it stalls on the spot, the
Where can I get new main jets for this carb???? Mikunki carb
I live in Northeastern Pa, Tri state area Nj Pa Ny, any other questions just give me an email and I should get back within a day or two