Results 1–30 of 65
Kevin Kelley — 10 years ago
I'm using the HPI that treats sells for the motobecane. The kit is a malossi 50cc gp1 with a max rotation of 12000 rpm. Treats also sells this kit for $195.00 AV10.
Kevin Kelley — 10 years ago
If you are facing the hpi -your on the right side of the bike, from this point the crank is turning to the right. This av10 I believe spins in the same direction as a puch.
Kevin Kelley — 10 years ago
so I set the piston to top dead center, and then dropped 2mm back and set the hpi for a right turning engine. This will work if moby is a right turning engine.
Kevin Kelley — 10 years ago
Is the timing of a gp1 motobecane for a right turning motor? I have set the timing of the hpi for a right turning engine. the timing mark on the internal rotor set to the second long line on the red pick up, with the logo to the right.
Kevin Kelley — 10 years ago
Do you just want the case?
Kevin Kelley — 10 years ago
I have one its a 17.5 phva originally for tomos a55 airsal kit
Kevin Kelley — 10 years ago
Looks like I will have to buy a brake plate. I noticed it right out of the box,The part that holds the cable adjust was broken. I just don't want to have it tig welded. its an easy fix if you have a tig or a mig but I don't. Please sell me your old brake plate for a honda hobbit 17" spoke rim. Be Kind bud.
Kevin Kelley — 10 years ago
Just need the front T, I'm putting it on a Moby front end, I can weld a break stop plate on the hobbit front fork, and go with that set up. I was looking to avoid the half days work, thanks for the offer though.
Kevin Kelley — 10 years ago
I am trying to buy a Honda hobbit or pa 50-52 17'' front spoke rim.
Kevin Kelley — 11 years ago
I want the whole thing not just the leaver.
Kevin Kelley — 11 years ago
Do you still have the e50 clutch cover?
Kevin Kelley — 11 years ago
Are these common auto or industrial belts? Where can I buy these?
Kevin Kelley — 11 years ago
Sell it to me
Kevin Kelley — 11 years ago
What belt are you using on your mobies with this set up? Molossi variator and Doppler clutch pulley. I know someone at tomahawk tuning would know, but I can't navigate their web site.
Kevin Kelley — 11 years ago
NEED A TRANSMISSION COVER FOR E 50.
Kevin Kelley — 11 years ago
Any one have a rectangular moby swing arm for sale.
Kevin Kelley — 11 years ago
Aaron I really don't like the electrical systems and there interchangeable parts, there finicky to say the least.The a55cylinder is off my street mate. I have two tomos engines that it will fit on. I need to keep it for changing out and and having at least one long range bike. I will take a return on the stock variator, the electrical you will have to pass forward.Back to post--- engine is as
Kevin Kelley — 11 years ago
How do you set up the spacing on this set up . I bought the spacers and don't know where the belt needs to travel on the clutch pulley. There are two cir- clips on one side of the shaft and one on the other side This shaft helps space the doppler clutch pulley, the malossi variator is right next to the case with no spacer. Any help with this spacing problem would be much appreciated.
Kevin Kelley — 11 years ago
also would like red spark plug cap and wire
Kevin Kelley — 11 years ago
How much for Puch clutch cover with clutch am thing
Kevin Kelley — 11 years ago
W.T.B. 10mm sealed bearing axle for Mob or Hobbit.
Kevin Kelley — 11 years ago
Thanks Glenn that is a great amount of info, now I have to decide which way to go. The spring is expensive, and i have one. The bracket is not that expensive, so I will do the spring first. After the spring I will get the 40 lbs. damper and will work from there. I still have to set up a launch leaver. Once I see these set ups in photos it helps, but the 3-d view works best for me. thanks again, K
Kevin Kelley — 11 years ago
SO THAT'S THE ONE TREATS SELLS, WITH ATTACHMENTS FOR AV10?
Kevin Kelley — 11 years ago
HERE IS A PIC WITH ENGINE
Kevin Kelley — 11 years ago
Looking for information on the engine side attachment. Picture would help.
Kevin Kelley — 11 years ago
Has any one attached one of these to their motobecane av10 engine
Kevin Kelley — 11 years ago
Has any one used treats silent mob for the spring on a Av10-- I need some pictures on the correct attachment to the case ( carter ) Thanks Kevin
Kevin Kelley — 11 years ago
Nice, I love hobbits and would buy it in a minute if on the rva. craigslist. I see you have a few nice bikes. Thanks for the pic's. Kevin Kelley RVA.
Kevin Kelley — 11 years ago
Thanks Tim, I do have a 6 star from a Motobecane. I was hoping not to have to fabricate a new brake stop. I put a hobbit front end on my Moto. and thought I could find someone with the same set up, and now moving on to a new bike. Let me look up the grande snowflake and judge its adaptability.Thanks kevin kelley RVA.
Kevin Kelley — 11 years ago
WTB, hobbit front mag ..