Results 1–30 of 277
Wholey Toledo — 14 years ago
no, i have not tried one yet.
JCKTM — 14 years ago
Jeez... my post was meant to be funny.
JCKTM — 14 years ago
Or... you also should not be riding that ped with out shoes on little one!!! you could seriouly mess up your feet!!!
JCKTM — 14 years ago
Arent you two a little young to be riding them peds? It looks like the smaller of you two probaly cant even walk yet.I would wait until you are older before trying to squeeze some extra ponies out of your war stallions. Just keep riding your peds in their stock forms.... you dont want to get in over your heads.Remember - be cool - stay in school!!
JCKTM — 14 years ago
That search function really works...https://www.mopedarmy.com/forums/discuss/read.php?f=7&i=32652&t=32590
JCKTM — 14 years ago
How difficult is to make a custom intake? I have a guy that lives near me with a metal fabrication shop, seems pretty talented. The actual job or fabricating an intake should not be so touogh…I have a Tomos A3, that I want to slap a 15.5 delorto on. I want to have the intake point out towards the front of the motor and offset to the side a bit.I started to do some research on polishin
CJ — 14 years ago
Thats the nicest lawn i have ever seen in my life.
Wholey Toledo — 14 years ago
I would say not to shop on the web, but maybe try one of the internets instead.Do you understand how insane your post is?
CJ — 14 years ago
Sears hand held impact driver. They will last a lifetime. I bought one 6 years ago... keeps on ticking. Loosens EVERYTHING when needed...
CJ — 14 years ago
what if you weighed 195? Still too stiff?
CJ — 14 years ago
I have one that wont exceed 20 mph, one that will do 27, and one that tops out at 23. They are all bone stock, and Ijust roasted all of the mufflers.
To Me or not to ME — 14 years ago
Are there any cool Offset 15.5 intakes that would get the carb out from under the frame to make jetting/tuning easier?
CJ — 14 years ago
How big of a carb and intake should i use? At what size do I stop gaining performance with the stock head/piston?
me — 14 years ago
I guess I am asking for advise from someone who may have already done this.Oh... and as far as jet sizes... I live at sea level in NY, and would need one for winter riding and one for our hot summers...
CJ — 14 years ago
I have a 1983 Tomos A3. It’s in really good shape, and worthy of some mods.I have done lots of searching and reading, but still am not clear on what to do for an upgrade.It seems as if the kit choices are limited, without having to swap engine parts, get an actual A35 engine, or mess with the wrist pin (10mm vs 12 for most kits), all of which sound out of my league.Now here is my questi
To Me or not to ME — 14 years ago
Its a 1983 that had had the oil injector, which has been removed and intake/injection port tube has been sealed.Is this still too old of a motor??How much would it be for an A35 engine if I needed to go that route?
CJ — 14 years ago
Yeah, I was thinking about going all the way.- piston/head kit- exhaust- carb- intake-high flow air cleaner- those chrome forks with the disk brakes- heavy duty shocks- re-gear-Raepaint the frame-cafe bars
jc — 14 years ago
I have a tomos A3 and am thinking about throwing a kit on it this winter for a project. The ped is in pretty good shape. Is the A3 motor worth the $$$ for this kind of project?
jc — 14 years ago
If you are real serious, I would suggest dropping a V8 Chevey small block into your frame. Holey 4 barrel carb, edelbroch headers and exhausts, bow it, port it, stack it. and whack it. dont forget your no2 for your street cred.
CJ — 14 years ago
To get the right jet size, divide your weight by 2, and then round up to the next avialable jet size. If your looking for extreme speed, just put in the size jet that matche the speed you are looking for. 100 jet size = 100 miles per hour.
J to the K to the M — 14 years ago
Some guy told me to do this to my FA50, has anyone else done it?Port one of them to the moon. Raise the exhaust, lower the intake, shorten the skirt on the intake side of the piston. Turn the head in a lathe and reduce the combustion chamber volume. Get an expansion chamber off of a little hot rod 2 stroke 50 of some sort, cut it up and weld it together so it looks kind of custom. Chuck the carb u
JCKTM — 14 years ago
How do I put Ape Hangers on a fa50? I can splice the electrical, where do I get the cables for the brakes, throttle, and choke?My noped wiill rock once this is done.
Ghost Rider — 14 years ago
I have now put the plumbers tape on it. Cnnvinced its a manufactuers defect........
Ghost Rider — 14 years ago
Well, upon further investigation, and use of the search button, I am still stumped.It actually appears that the gas is leaking out of the bottom of the brand new petcock.I think its leaking from around the dial/level/petcock positioner. From the bottom of it, not from the connection between the petcock and tank.Believe me, I have spent sometime with a flashlight, paper towels, and lots of spilled
Ron L Hubbard — 14 years ago
I just got a new step through Tomos Petcock from 1977 you know who.it has three parts. The petcock, a nut on the pet cock, and a rubber washer.Whats the order on the install?i did: petcock, nut, washer, put some gas in the tank and spilled gas all over my floor, which made made frantically run to turn off my propane sit on top heater for fear of a hiroshima incident as gas spilled on my garage f
me — 14 years ago
is it the top or bottom ring? You really only need one to make your motor run. They have two because they use one as a back up. Now its ok to run your motor like this, but I would not advise trying to race a corvette or do burn outs in front of your crew.in one of your previuos posts, you mentioned that once you got you led running sgian, you would share some good new with uld be willing to he
me — 14 years ago
inconsiderate Internet posting leads to broken rings, oily plugs, bad grades in school, which then lead to poor comprehension, which leads to the inabilty to realize that one must provide a two stroke motor a proper mixture of gasoline and oil. This may also lead to acne and lower social standing. Please talk to your mother, pastor, school counselor, or even to those voices that live inyour head
me — 14 years ago
please go tell your mom that you and your best freind are on the internets, without parental supervision and are bugging people.Thank you.
me — 14 years ago
please take your scrathed piston and go to Iraq. Walk down the street waiving it above your head and scream as loud as you can"my plug is oily! My plug is oily! My plug is oily!"
me — 14 years ago
please go away with your oily sparkplug. Please don't come back. Please put your oily spark plug into your manbag and pedal your led to a foriegn country any bug them.