Results 1–30 of 53
Howdy there. I have a 1981 Garelli Rally Sport with a Dellorto SHA 14.12 carb and a Polini exhaust. Right now I've got a #56 jet. The ped runs great once it gets going, but struggles a lot when taking off. I think I need to upjet- any suggestions on how much? I plan to get a high-flow air filter to replace the stock one also, if I can find one that will fit. I don't know if the high flo
www.1977mopeds.com or www.mopedshop.com have lots- both are great stores.
Is the problem that they just don't have enough power?
Hey there- I'm in the process of supping up a 1978 JC Penney Pinto. I bought a high-flow air filter and plan to replace the original 12mm carb with something larger, and get a new exhaust. It has a Puch E 50 engine.What do you suggest I go with? I'm thinking a 15mm Bing, but am not sure which exhaust choose. I'd like the bike to have a healthy top speed without loosing too much acce
Oh, the pedals work fine. The engine just gasps and won't stay running.
I need some advice. This morning my Pinto ran like a top. I cleaned the carburetor, then removed the exhaust and de-carbonized with oven cleaner. Now it won’t turn over. The gasket between the exhaust and the engine was weathered and broke. Any idea what my problem could be? Is the gasket needed to run? Thanks for the help.
Howdy Kev-bo. You're the bee's knees.
Bummer John. I'm sure you'll find something snazzy.
For Sale: 1978 JCPenney Pinto 2 MopedManufactured by Kromag of Austria, it features a Puch E50 1.5 HP engine, a Bing 1/14/157 carburetor, and Snowflake mag wheels. It also has a metal high-flow air filter and a metal fuel filter. Cosmetically, I'd say this moped is a 7 or 8 out of 10. It looks very nice, but isn't perfect. It runs great. Starts on the first kick and idles strong. The odo
Howdy there. I've got a Honda Express front fender and rim/tire that I'd like to sell. Take a look at the picture. I'm asking $25 for both if picked up, $45 shipped. Send me an email at email@example.com if you're interested. Thanks!
Harvey - yep, it is a front fender.
For Sale: Stock 1978 JCPenney Pinto MopedManufactured by Kromag of Austria, it features a Puch E50 engine & a Bing 1/12/299 carburetor. Cosmetically, I'd say this moped is a 7 or 8 out of 10. It looks very nice, but isn't perfect. It runs great. Starts on the first kick. The odometer reads 3,879. I just cleaned the carb, replaced the exhaust & pipe gaskets, and replaced the carb
Brian,I posted a few additional photos of the Pinto to the album. Let me know if there is anything else I can do for you.-Adam
I'd like to hold onto the Pinto 2 (unless the price was right). $300 for the Pinto would work for me.
The Pinto 2 works great. The yellow Pinto worked fine last spring but wouldn't start in the fall. I think it has a minor issue with the clutch cable. I just haven't been able to work on it inside.
I changed the album settings to public. You should be able to access it now. -Adam
I'm looking to sell this pair of matching Montgomery Ward Open Road mopeds. I bought them for projects, but haven't had time to work on them.Both mopeds are complete, but aren't running. The engines are not seized. These have Columbia/Sachs engines and Bing carbs.These mopeds need a little elbow grease to get them up and running. It shouldn't be too difficult to fix one up and
Howdy- the engine is gone, but I still have all the other stuff.
Just found a fender and a chain guard also.http://img.photobucket.com/albums/v400/sunnyday37/P8281007.jpg
Howdy there. I've had these Honda Express parts lying around for a while and am hoping someone can get some use out of them. I've got a wheel and an engine for parts. They came off of a 78 or 79. Send an email to firstname.lastname@example.org if you're interested. Thanks!Picture:http://img.photobucket.com/albums/v400/sunnyday37/P8281006.jpg
Thanks, it is a sweet moped. Hopefully I'll find a good home for it.
I hate to do it, but I’m going to sell my 81 Garelli Rally Sport. This ped is in excellent condition. 2,998 miles. It looks great- probably the best looking Garelli in Michigan. It’s got a very clean Dellorto 14.12 carburetor and a Polini pipe. The acceleration is a bit weak with the Polini, but could easily be fixed by returning to a stock pipe or, better yet, getting a larger
Hi there. I'm looking for a new home for this Garelli Huret speedometer. I bought this and a speedo cable from another Moped Army member, but found out I only needed the cable. This speedometer is in excellent condition. I'm asking $25 shipped.
BumpPed has been disassembledParts still available:-exhaust cover-engine-oil pump-handle bar assembly-front rim and tire-front fender-front break assembly-rear brakes-forks-frame
BumpPed has been disassembledParts still available:-exhaust-exhaust cover-carb/throttle cable/choke cable-engine-oil pump-rear shock-handle bar assembly-fuel petcock-front rim and tire-front fender-headlight/speedometer bucket-speedometer, attachment spring, and speedo cable-front break assembly-rear brakes-forks-frame