Results 1–30 of 44
no i dont knwo how or ever heard of the pins where are they?
ill be getting a metra kit 64 cc...basically the same as a polini., a bing 15mm carb, and a bi turbo pipe.. then ill be changeing the cranks to front 14/16 tooth, and rear 45 tooth.
i dont believe that the clutch is slipping or anything i relaly just feel that the bike is old and sucks haha.. but i dunno i could be wrong. i dont feel anything slipping or anything wrong, theres no wierd noises or anything but ill check it out
no its always been like this just figured i might want to change it. no mods yet but i will soon be adding a biturbo exhaust with a 56 jet , a puch power air filter, a 45 tooth crank , and a metra 64cc kit. will this be better acceleration after i do this.. its always been like this i just thought id ask. its a 77 puch newport. theres an attachment of what it looks like
when i twist the throttle theres a good second or two of delay before the motor hauls on slowly to get my 170 pound ass goin. is there a way to tighten up the delay so that when i twist the throttle it revs and takes off right away?
im looking into buying one, i was told to get the 64cc polini kit but i see a metra kit 64cc for 50 bucks cheaper? is their any difference and i also see a 70 cc puch speed kit is that the same and if not faster? whast the top speed of each of these kits? my moped reaches 30 mph what will these kits make my ped reach?thanksalso what is a better kit to buy?
she runs and starts up fine but even after running it 3 min or 10-20 min.. when i come to a stop it just shuts off ..once in a while it will slow down and sound like its gonna shut off when i stop ..but then picks up and idles soo i dunno what or why this is doing this..anyone?
wow man thanks a lot im gonna look at most of these parts online cause i feel thats the best way to go, is it not? .. also one last question after doing all thise work to it would it take away the gas mileage?.basically im gonna put on the quieter pipe, and the crank to "chew up hills" becuase i need to go up a 2 mile long 50 degree Mountain. so i hope this wont affect the gas mileage, i
hi i have a 1977 puch newport. its sweet and it runs top speed around 30mph. i would like to get it up to 40-55 mph. any speed in that range. i was wondering what kind of parts i could get like pipes or something or anything i can do to the bike that will allow it to go faster. does anyone have any ideas or suggestions? thanks. highly appreciateddan
hey man..your better off sellin it haha. those things barly go 25 like you said and their is no clutch or anything to mess with to get it to go faster. the only way would be a whole engine overhaul and that includes taking out the whole engine and replacing it with an engine from a honda Aero 50cc or 80cc .. its a lot of work ..
ok so me and my buddy have a lb50 yamaha chappy we are fixing up. basically no parts or anything were damaged when he rode it two years ago. he just got it real dirty running it through the dirt and mud. so i figured it just needed to be cleaned. after putting fresh gas and new oil in, we let it idle for a while and sprayed choke and carb cleaner in the carb and it started running a lot better.
WHERE DOES THIS TUBE GO~~hhaha
Im fixing up a buddy's yamaha chappy.. basically it ran forever and he rallyed the shit out of it. drove it through mud dirt and everything basically used it as a dirtbike. about 2 years ago he ran it one day and the next day he went out and it woudlnt start. so i was like ok you were probalby out of gas .. we brought it to my house i hosed it down clean and sure enough it was empty as hell.
Im looking for a float for a 1980's motobecane moped. if anyone has one i can purchase that woudl be cool .. if not does anyone have any idea where i would be able to find or get something like it that would work as a substitute. thanksdan
lookin for back right directional cover for a yamaha lb50 chappy. mine is broken and lookin to see if anyone has one that will work or any place to get one like mine
yo pretty much all i need is that shit
Hey i need a battery for a Lb50 CHAPPY do you have one? thanks
cool man.. IM also looking for a SEAT i need a seat and a battery
just got a fa50 and needs some parts to repair it up a little..if anyones got anything let meknow.. some parts i need..., new seat, light cover for blinker, foot pegs, and probably a new muffler...but anything else ill take as welll
looking for a jet for my new bi turbo exhaust , i was told that i would need a #90-100 jet. so if anyone has one they will sell or knows where i can find one online, that would be great thanks
how much would you sell the front sproket to me for?
i have the same bike just different color and not as shiny and clean as this one but in just as good as condition. mines got 3000 miles and it runs 30mph strong on flats. i bought mine for 125$ id pay 300 max for this take a look at mine...also this is a great machine.. i recomend puchs to ANYONE
AWESOME how much would you sell it for?
do you hvae the front key lock with key?
looking for a lock for my puch 77. its the lock down by the by the front fork. it locks the front wheel from turning so you cant ride it. lookin for a cheep one for sale that has a key obviously. thanks
Also looking for a seat that fits two people under 50 bucks
do you have a pic of what it looks like? and where is the moped locatedhow much$
Im looking for a horn, a 15mm Bing carb, a Bi Turbo exhaust, and a 64cc polini or metra kit .. if you got em cool ill take em for cheaper then what i can get them for offlinethanks