I've been reading for a while on 50cc 2-stroke/moped performance. Seems to me that it's a waste of time to mess with the engine. All the performance parts I've read about increase top-speed, but sacrifice low-end --- or the other way around. The engine is too limited by the one-speed tranny. Does anyone have any information about custom-tranny design... a simple clutch and trann
is it possible it is not starting cause the carb is leaking too much fuel?? it is definitely flowing out where the float bowl and the top of the carb meet. the freaking gasket is gone and i tried to seal it up by cutting a rectangle out of a plastic bag and placing it between the two before i screwed them together. the carb is super clean i have compressed air and carb cleaner flowing ni
95 kinetic tfri'm leaking fuel from the carb... gasket is gone on the float bowl. will one of those tubes of gasket sealant work for that?also i can get the bike running and hold an idle but as soon as i turn the throttle it cuts off. if i lightly pull the throttle i can get it to rev a little, but not for long. i know i have a spark but im not sure how good it is. fuel is making it a
if there is no air cleaner on a horizontal 50cc and the carb is on the back, will fuel leak out? i lost the stock air box and put a makeshift lawnmower sponge filter on and i left the petcock in "on" and lost all my fuel overnight... its gotta be that or something missingon the carb95 kinetic tfrthanksjosh
check the little hole in your fuel cap to see if it is cloggedcheck the fuel filter to see if it is cloggedmake sure fuel flows out of the petcock... then make sure it flows out of the fuel line. then hook up fuel line to carb.If it doesn't work then, you know its the carb so take it back off and clean it again with carb spray cleaner and use one of the twisty-ties from a loaf of bread (pu
How often should I wash/ re-oil the filter?
I bought a filter for a lawn mower... a big sponge filter. Do I have to soak it in oil like the directions say? Or can I just put it in there dry?
Believe it or not, I think someone stole the air filter box off of my moped. I bought a rubber two inch plumbing hose and a fastener, put wire mesh for the filter and tightened it on. Very snug - but I think i'm getting too much air.When i stop at a sign, moped cuts off. Also, acceleration isn't as smooth anymore and i have to ride with the choke on.Any suggestions? Adjust idle s