Results 1–28 of 28
Thanks much. I didn't remember that connector causing any issues last year. I was actually pretty stupid today. It didn't occur to me until after your note that the floor guard was off the hole time and too much air was causing my issues (fast idle; which is why I thought the throttle adjustment connector was my problem). Anyway, all is good now and I'm ready to ride into work t
Hi,I have a problem where the throttle cable connects into the carb. The set screw (?) is broken?. See pic to see what I am talking about. Any recommendations on how to fix? New carb or can I buy just the top half of the carb (what is this called by the way?). I don't think the problem is with the cable itself. Thanks in advance.
Hi All. I can't get my maxi to idle. It runs fine when i'm giving it gas, but carps out as soon as i let go og the throttle. I have backed out the throttle cable as far as I can, and I almost had it running on its own (at least I thought. I can't reproduce that anymore). Any help is appreciated. Also, how do you adjust idle the throttle cable and idle screw. Do you start with
I need help with a 1977 jawa transistor 40 moped that I recently acquired. I can't find the owners manual and am lost. I guess my biggest issue is the piece missing in the attached picture. Anyone know what it is or where I can get one? Someone on ebay is offering the following but listed it as a 1992? What are the chances it would fit a 1977?http://cgi.ebay.com/ebaymotors/1992-JAWA-MOPE
i have to keep giving it gas to get it to stay running. If I try to adjust the idle screw or the throttle cable adjustment while I have the throttle open some (to keep it running) I can't seem to get either activity (adjusting the cable or the idle screw) to influence how it runs (can't even get it to idle really high on its own). Not sure how to determine if the slide moves when adjus
ok. so i am not leaking gas anymore after adjusting the float bowl. My new problem is I can't get it to idle anymore. I have played with the throttle and idle screw adjustment to no avail. It ran fine when it was leaking gas so I am assumming I should continue and concentrate on the float? any help is appreciated.jeff
Hey all,I have been trying to track down a leaky carb on my 77 maxi for some time now. I think the float bowl is the problem, but replaced that and it seems to sit the exact same way. Haven't put the carb back on to check if its still leaking, but I think it will (leaks from the black button on carb next to air/idle adjustment screw). The jet was replaced recently and the carb cleaned. Pi
i'm having the same problem. Anyone figure this out yet?
Hi all,Can't figure out why i keep leaking gas from the carb. I have cleaned it numerous times, and studying closely, best I can tell is the gas is leaking from the black button right in the center of the attached pic (next to the air/idle adjustment screw. I need help desperately!thanks
check out http://video.google.com/videosearch?q=moped+carb. it's probably the same bike you have in the video. good luck
mike, let me know how you make out and where in philly this guy is. I need his services also. How much?thanks
Thanks. What about the pulley nut(s)? See pic. Itm looks like something should be holding this on to the ped. Is this how you tighten the pulley as thijs_rallye suggested?thanks
Hi all, have a 74 Vespa Ciao and a couple of questions that I hope you can help with.1) Speedometer cable is busted. Where can I get a replacement cable? I also need the speedometer bulb (by the way, how do you get to the bulb? Ignition in inside headlight housing and is in the way to get to the speedo).2) the rear pulley is making a clicking sound as the real wheel turns. Also, it is missing
1978 Puch Maxi for sale. Located 20 minutes outside of Philadelphia. Moped in very good condition for age. Paint and chrome in very good condition. I do have PA title as well.thanks in advance
Hi,I need a throttle cable for a 1974 vespa ciao. Can anyone help
can you post a pic of the vespa ciao carb
Hi, I have a vespa ciao (1974 or 1975). How much for a carb and what is the condition?
Hi,Anyone have or where I can get a vespa ciao 1974 throttle cable?Thanks in advance,Bergdog
Hi Rob,I'm headed out of town tomoorow but will be checking email off and on. Let me know when you receive title for the puch. I will be back on Wed, 3/29.thanks,firstname.lastname@example.org
thanks for the easy transaction. Now of only the windo would die down and it would get a bit warmer!
Thanks Dave. I would like to find something closer but you may hear from me again. thanks
Hi all. Looking for a ped in the local phila / S. Jersey. Interested in getting involved in peds. Like this site alot
Steve, would like to take a trip up this weekend to check out this ped. Let me know if you are available
Where are you located or how far are you from lets say the king of prussia area? Also, how fast does this baby go. thanks
Hi, I'm interested in this moped. I am right outside of philly and would like to make an offer
Lisa,Follow these instructions and you'll be set. It's really not that tough.http://video.google.com/videosearch?q=moped+carb+expertLet us know how you make out