Results 1–30 of 146
so all i did right now is unplug the air box and put my 56 jet in. an it made a huge diffrence. it accelerates so much faster! i cant wait to see what the biturbo and highcompression head will do. thanks all`landon
i have a dellorto carb and a garelli super sport xl. i wanted more speed so i got a size 56 jet. and when i went to put in in the took by carb apart only to find a size 50!. i thought it was a 54. so i put the 56 in. and i want to know what you guys think
well ok i alos got a high compression head and a bi turbo exhaust so that should do it?
im going from a size 54 to 56 in my garelli moped and i want to know when i put the new jet in do i need more air flow to compensate for the higher flow of gas?
by saying re-jet you mean up-jet?
i also did some custom painting, my headlight casing, my airbox, footrest, header. all blue and chrome blue on the header
i will be impressed and very happy if i can get 45 out of it. do you know of any of the resticters and how to remove them?
well i tryed to do everything that could rob profromance i cleaned the carb and drilled holes in the baffel on the end of the pipe and it went up a little in speed but not to much like maybe 28? my speedometer does not work so i have my friend drive beside me to tell me speed
I have a garelli supersport xl and ive been looking and asking around for people that have done any proformance upgrades to them and like nobody has. it goes like 25 toped out and i just want a little more speed and maybe some acceleration. so i was looking for a pipe and nobody makes pipes for garelli's let alone any proformance parts. i found one part for it on 1977 mopeds and that was a hi
Themopedjunkyard.com has alot of garelli parts but no proformance parts for them
more than anything i want an exhaust. i would love a biturbo but they do not make them for garelli. i cant find anything for garellis. if anybody knows anywere to get a garelli exhaust please share info`landon
My garelli supersport is stock but i want to change that. my girlfriend just bought me a high compression head for it. i was told that just putting hat on without any other mods could be bad. can somebody help me on what all i will need for it to work? ive been lokking for a exhust pipe but everywere i look doesnot have garelli. if you could point me out a site that has garelli pipes or proformanc
where can i get a jet and exhaust for my 78 garelli supersport? let me know
where can i get those at? or should i just get new forks? i want the ebr racing forks but there out of stock on 1977 mopeds, there in stock on westcoastmopeds.com but they want like 30 dollars more than 1977 does
ok thanks alot, now i just need to figure out what color goes where. i think i can do it tho
i noticed that on the inside of the switches the holes are labled A,B C and so on. if anybody could check theres and let me know what color goes to what color that would be awsome.
i bought some cev round switches from 1977 mopeds for my puch. i got them and they look good but i dont under stand how to get the wire to stay in the hole on the switch, and i dont know what wire goes where. if anybody has any pics or instruction please let me know im so close to getting this ped to run!`landon
lawn and garden store? its a concrete cleaner. you gotta be real careful with it, it will burn your skin off and the fumes with knock you down and out. wear gloves. and safety glasses
get some muratic acid and run that threw it, with the petcock on it. then run backing soda water after that to nutralize it. then it should be very clean inside. , let the acid inside the take over night.
do the threds do anything that are on the middle of the fork?
i have some stock forks on my puch but when i but the top bolt in them and let them down on the wheel they go up all they way. like the fender mounts hit the frame of the fork/ i was wondering if i am missing a peice or can i adjust them?
old tomos like that are made to kill the motor when the brakes are pulled. its one of tomos's safty features, it also saves the clutch.
in your diagram there are only five holes in the board i have seven?
i have a puch maxi and i am trying to put it back together. im was putting all the wires back into the board and it ended up that there was to many.? can i dubble some up? or what? i am just confused. let me know if you can help. i think its a 77 maxi of some sort... the eletric board has seven slots on each side.
does anybody know the order of colors of the wires on the main bored on a 77 puch maxi?
i never did this before. i bought this puch maxi and it ran but it lost spark. and the guy i bought it from said it needed points. so i bought some but i dont know how to put them in. if you could guide me a little that would be a big help. thanks alot!!`landon
hi so today my 2003 tfr took a shit on me and wont go. i think there is dirt in my carb because it sounds like its starved for gas. i want to take it off but i dont know how to get to it with out taking the whole moped apart. so if you know an easy way to get to it please let me know!!thanks alot!`landon
ok thanks alot.. now does anyone have a piston i could buy from them? its a 72 puch maxi? 2 speed