Results 1–30 of 123
Chris Couillard — 19 years ago
no the timing wont change any . it runs on point so if there was a problem it would be easy to fix .
Chris Couillard — 19 years ago
ok you dont have a clue
Chris Couillard — 19 years ago
not the head gasketsorry if you under stand methe bore gasket it is not needed
Chris Couillard — 19 years ago
Adjust the carb it is either getting to much air or gas check the plug is it wet
Chris Couillard — 19 years ago
Rich thats a good way to doit but I still think he will have to tap it with a hammer and then it will just pull off
Chris Couillard — 19 years ago
so budy how do you like the exhaust is it realy loud or what ? Does it look okthe bore will come off you just got to tap it with a hammer to break the seal . then you want to look at that stuff I sent to about the pistoncleanthe gasket off it ( you dont need it We are trying for Higher compression any ways ) When putting the new bore back on either use high tac or a real good atv . the stuff that
Chris Couillard — 19 years ago
fred was the manthe mith the moped repair man an all around good guy
Chris Couillard — 19 years ago
does anyone know were I can gut a motor for an 80"s puchI amworking on a friends bike and the motor was not ran for 4 years and now it crank bearing I think are goneand there is some kind of wiring problemWHen its runing you hear a loud rapping and when you turn on the like it stays on for about a min. and turn it self offthere is no blow by and the piston is in good shapecarb is in good
Chris Couillard — 19 years ago
citmatti does that have a sach 505 motor on it
Chris Couillard — 19 years ago
I'm looking for a carb and some other odds and endsemail me if you got any thing
Chris Couillard — 19 years ago
you guy have to be pulling my chain 3000.00 for a express tankI m rich I got 12 tanks wooooohhhhhh hhhhhh
Chris Couillard — 20 years ago
lots of part to many to make a listbut if you need it i probly got itI'm located in the milwaukee area and will ship just about anywhereall prices ( well let's just say there not set in stone )
Chris Couillard — 21 years ago
i got a road master lots of extra parthell i got basicly 2 motor for the thingneed to be restoredwill trade or sell make me an offerits in wisconsin, milwaukee
Chris Couillard — 21 years ago
i need a seat and new throttle and choke cableplus a tail light lence
Chris Couillard — 19 years ago
depend what year is the Riva
Chris Couillard — 19 years ago
does anyone know were I can gut a motor for an 80"s puchI amworking on a friends bike and the motor was not ran for 4 years and now it crank bearing I think are goneand there is some kind of wiring problemWHen its runing you hear a loud rapping and when you turn on the like it stays on for about a min. and turn it self offthere is no blow by and the piston is in good shapecarb is in good shap
Chris Couillard — 19 years ago
hey a hobit is not an express i figured i would point that outnothing is the sameRoss the info is in the mail
Chris Couillard — 19 years ago
hey did readjusted your carbair idle screw
Chris Couillard — 19 years ago
ngk is the best for any bike I dont know about the identifacation but all around ngk is the best
Chris Couillard — 19 years ago
there is a lot of work to make your bike a two seater1 the mount are not strong .I have owned between 10 and 13 express and those mount are real easy to break . there only tack welded it there2 how would you get to you gas tank3 the weight could really put to much stress on your bike and it could breakBut if you really want to do it ,you would have to get rid of your little rack and reinforce the
Chris Couillard — 19 years ago
the cops around here seem to be after bigger crimels than moped thiefs . thats alright though like i said before Im going to get all my bike back .
Chris Couillard — 19 years ago
Last night I was out walking my dog and I hear one of my mopeds.bammthere it was some crack head was driving down the road on it . so I tell my dog get him (I must of ran for a mile or two till I finaly cot up to the guy . my dog tree the ass hole .he was like ha man get your dog . ( dog are great .) So i asked the guy about my moped ,like thats a nice bike were did you get it . he said " i f
Chris Couillard — 19 years ago
thats a moped woware you sure that aint a crouch rocketthat to cool looking to be a moped
Chris Couillard — 19 years ago
WHEN CLEANING THE OUT SIDE OF YOUR CARB DO NOT USE CARB CLEANER. IT WILL EAT YOUR PAINT AND RUBBER OR PLASTICUSE PURE SILICONE IN A SPRAY CANTHE COMPANY THAT MAKE IT IS CALL KELITS GREAT AND THE BEST PART IS IT DRYIES NOT OILLYBUT BEFORE TRYING THIS WOULD STILL TRY SPRAYING IT ON AN AREA THAT CANT BE SEEN JUST IN CASE ( I HAVE NOT FOUND A PAINT THAT IT MESS UP BUT IS ALWAY BETTER TO BE SAFE TH
Chris Couillard — 19 years ago
GREAT NEWS I FOUND THE PARTI'M GOING TO CLEAN IT UP A LITTLE THOUGHALL NEED TO FIND IS A EXHAUST FOR YOU NOW THAT LOOKS GOOD I WILL EMAIL YOU LATER WITH MORE DETAILS .
Chris Couillard — 19 years ago
they are fast but not stock you have to get a them deresticted and then they are fast 55-70mph and the best part is that they are fuel injected (at least on some models) they kind of look like a f12 ( i think )
Chris Couillard — 19 years ago
the mags lok like there off a 78 50v but the fork is werdi dont have a clue on were to get part for that thing moped ware is the only place that come to mind
Chris Couillard — 19 years ago
well since all my ped got stolenI guess im stuck with a scooter scooters rulebut I still like the look of a old pedit not about the look or how fast your bike is. its all about the ride
Chris Couillard — 19 years ago
well I can now tell you it is a 1979but mag wheel hmmm for the fork it looks like right one
Chris Couillard — 19 years ago
wow hmmm that guy might be crude ( just a little bit )but some of his stuff is kind of funny if you are into thatI guess it's the great hate debate or something like thathow much free speech can people handlethe people here got to realize that we do have tone it down a little bit there are youngster in hereSo it all up to Simon the great to say what is right and what is wrong