Results 1–30 of 113
SDizzle johnson — 8 months ago
Thanks
SDizzle johnson — 8 months ago
Hi, trying to find the original side mirror or something similar.Thanks
SDizzle johnson — 9 months ago
I could learn but I really don’t want to screw anything up. Whats the easiest way to do it?
SDizzle johnson — 9 months ago
I have this one but the connectors are mini. I want to return it.
SDizzle johnson — 9 months ago
Trying to find the original tail light for a 1978 Puch Newport. Please message me if you have one for sale.Thanks
SDizzle johnson — 11 months ago
Hi, trying to see if anybody has a Puch mini maxi original seat. If so please contact me. Thank you so much.
SDizzle johnson — 2 years ago
Yes is this for sale?
SDizzle johnson — 2 years ago
Hi, anybody have a side mirror for a 1983 Puch mini maxi? Thank you
SDizzle johnson — 2 years ago
Yes missing a pedal. My buddy welded it back on but what new.
SDizzle johnson — 2 years ago
Wow, super clean beautiful ped. What size exactly are the arms and what pins work the best? Thanks
SDizzle johnson — 2 years ago
Hi, trying to see if there are any original pedals and arms for my 1984 mini maxi. I like to keep it stock. Thank you
SDizzle johnson — 2 years ago
Trying to find a 1980’s tail light for a 1984 Mini Maxi. Just seeing what’s out there.Thanks
SDizzle johnson — 2 years ago
Good looking Moped!!
SDizzle johnson — 2 years ago
Thank you for the reply.
SDizzle johnson — 2 years ago
Thank you ID OD. I appreciate it.
SDizzle johnson — 2 years ago
Thanks Rebel you always have the answers! Much love to ya!!
SDizzle johnson — 2 years ago
Hi, trying to find a tail light assembly t for my 1984 mini maxi or suggestions on what’s the easiest fix.Thanks
SDizzle johnson — 3 years ago
Thank you
SDizzle johnson — 3 years ago
So after looking in depth to why it wasn’t starting I checked the carb again and made sure the banjo wasn’t clogged which it wasn’t. I checked to make sure I had spark which I did. Then I checked the points which that was the issue. It wasn’t moving at all. I adjust the top point and clean both of them really good. I tried starting it and bam started right up first kick. I checked and set the poi
SDizzle johnson — 3 years ago
Hi, just picked up a 78 Puch Newport. It was sitting in a garage for 20 years. I got it started it idled well and ran then after shutting it off after the ride it wouldn’t start tonight. I tore it all apart to see if the carb was dirty or the jet was clogged. Everything was good After looking on Fred’s guide I’m leaning towards the condenser. Has anybody had this similar problem.Thanks
SDizzle johnson — 4 years ago
Where would you buy parts for these types of scooters?
SDizzle johnson — 4 years ago
Thank you
SDizzle johnson — 4 years ago
What size is that?
SDizzle johnson — 4 years ago
Hi, curious what size bolt is the transmission drain plug on a 1979 yamahahopper?Thanks
SDizzle johnson — 4 years ago
Right now there is a 54 jet size in it. It has s aftermarket exhaust and factory air box. What size jet should I try next to go to the next level?Thanks
SDizzle johnson — 4 years ago
Hi, curious I have a list of bing carbs and it tells you what size jet should be in the specific carb! I have a 12mm carb and the number o. The carb is 1/12/321. I see every other number but that number and suggestions? Thanks
SDizzle johnson — 4 years ago
Thank you
SDizzle johnson — 4 years ago
Hi, curious what size jet would one reccomend to go in a 14mm bing carb with a intake? It’s going on a maxi. It has a fuego exhaust on it.Thank you
SDizzle johnson — 4 years ago
Hi, I was curious how much a puch maxi speedometer would cost and to see if anybody has one for sale.Thanks
SDizzle johnson — 6 years ago
Ok thanks