Results 1–30 of 232
Tess Zacharias — 7 months ago
Here’s the mags
Tess Zacharias — 7 months ago
Wish you was closer I like them Hondas
Tess Zacharias — 7 months ago
Anyone who bout from me before knows I’ll sell great stuff for great prices
Tess Zacharias — 7 months ago
This one has the factory shine inside and out and there is no chips or stripped holes. It’s in mint condition
Tess Zacharias — 7 months ago
I have new condition puch magnum seat $125 shipped. Also have some brand new never used for n the box aftermarket 5 star mags with the hubs just missing front bearings and axle $160 shippedTry again no buy a magnum tank
Tess Zacharias — 7 months ago
I came across 2 nice e50 4 bearing cases that still have their original shine to them. And I have a few older beat up ones so I’d like to sell 1 of 2 so I can buy a magnum gas tankPm me $100 shippedComes with clutch cover
Tess Zacharias — 7 months ago
Gone
Tess Zacharias — 7 months ago
Thanks man. I agree. I just dont get why people think they have gold. I’ll buy a tank with holes but not for the price of a new one. But a different one may be the way to go I’ll check them out
Tess Zacharias — 7 months ago
I just want to say I appreciate all you good people on her who are honest and try to help. And I’m sorry if I make people made. I’m not trying to get stuff for free, but if I’m told something is in great condition and I pay top dollar then I expect it to be so. I bought a e50 case for $130 and all the cylinder threads were stripped out. I’m not to good to fix stuff but if I wanted to do that i cou
Tess Zacharias — 7 months ago
I have a puch cylinder head and 14mm intake. Also have original maxi handle bars and stator and 45 mm rear sprocket and a seat post for the long seat. if anyone needs anything pm me. my area is really expensive to ship so if you want to pay $20 for shipping then whatever you want is yours. I think I have an original cylinder but I have to look.Just want to give this stuff to someone who might nee
Tess Zacharias — 7 months ago
His looks like it’s corroded on top I don’t want to have to mess with it or buy another one. The only problem I had was with a case and I didn’t complain I just said it was to dirty to tell and I needed another one is all I said I ant even say any names. You just like to talk cause you have nothing better to do. I’m done being nice
Tess Zacharias — 7 months ago
Mind your business you asshole. Find the post or shut the fuck up
Tess Zacharias — 7 months ago
Go fuck your self I don’t want junk. Stop worrying about me. When I pay a ton of money for stuff I want it to be good. Find post were I bought stuff then complained about it. So shut your fucking mouth
Tess Zacharias — 7 months ago
Thanks
Tess Zacharias — 7 months ago
I cut the old one off very nice and evenly. so If it is nicely cut so I can just make sure it’s level and Weld it on. Then I’ll throw in a nice e50 4 bearing case
Tess Zacharias — 7 months ago
Looking for nice bracket frame any frame but a maxi so I can fix my magnum that needs a new one I’ll pay $80 for a nice one that’s cut even
Tess Zacharias — 8 months ago
Yea they’re not the nicest looking. I’m going to keep one just in case and sell the others
Tess Zacharias — 8 months ago
I didn’t realize that cost that much. Should have know but there is so many pipes
Tess Zacharias — 8 months ago
Plus shipping
Tess Zacharias — 8 months ago
Nice. $70
Tess Zacharias — 8 months ago
Ok cool, I figured it would work I just haven’t got to it yet but it is the same tank. I saved the because they were vertical
Tess Zacharias — 8 months ago
O ok. The ones I have have the gas cap on the very top on the angled part
Tess Zacharias — 8 months ago
I have a few Batavus starflite tanksAre they rare?Anyone have one on a puch spirit frame? They are pretty big tanks I may try it and see
Tess Zacharias — 8 months ago
Maybe. I know I was told on here about 5 months ago they were not ready to use and and needed drilled and taped and filled down and stuff like that. So maybe they’re still working things out or they are made to do more then we know. I don’t think people were trying to stear me away from buying them for no reason so maybe they know something we dont
Tess Zacharias — 8 months ago
Yea you’re right, still really cool either way it will work
Tess Zacharias — 8 months ago
Yea I know, it don’t make sense why they did it like that is there a way to space it on the other side of the bearing? I may mess with it when I get mine and see. I don’t like it either For all that money it shouldn’t be that way
Tess Zacharias — 8 months ago
That’s why I was asking because when I ordered mine it said it comes with 2 spares one for each side and I wasn’t sure what they meant so there may need to be a spacer there also
Tess Zacharias — 8 months ago
Do you need a spacer on the other side too? Or just that side?
Tess Zacharias — 8 months ago
Ok thank you
Tess Zacharias — 8 months ago
Still looking for a magnum vin plate if anyone has one laying around or whateverThanks