Results 1–30 of 46
Rob, I'm Interested depending on cost of shipping. Can anyone out there recommend a good, reasonable, shipper to contact?
Ok, so what are you looking for $ wise?
No insult intended, hadn't ck other on line. $25 + shipping to 63119. Do u by chance have floor panels?
Do you have any pic of the engine. Is it a 1,1.5, or 2 hp. I have an Honda Express engine that might fit, or be interested in out right bye it from u. Anyone out there know if a 77 nc50 will fit a 79 PA50?
I would take del lotto 19.19 & shocks. Sending PM.
I'll pass not in hurry, thanks. I'm also looking for 1994 Tomos Targa LX side panels If you run across any.
Yeah, I could use the fenders but I'm 2 hr away. Don't get it, willing to pay shipping, Columbia MO is a small college town, he hast to past the post office at least twice a day.
Check see if still on CL. Had a clean Free Spirt tank. https://www.facebook.com/marketplace/item/388925919154661
Looking for a new or used Treats Team 46mm cylinder head. New or used in good shape, sport or super street style.
Don't know if this has ever been covered: Make a 4 ply to help prevent flats. Take a used tire one size smaller. Take a 2x20 cut it down, place it in side a 2x25, then place tub in. It works on road racing bicycles. Don't know how it would preformed above 27MPH. Oh, don't forget to carry a dollar bill. Use it to place between tub and 2 ply side wall in case of a tear, will get you
If you had I was going to ask you to share some moped love! I Just ordered that kit. You interested in selling the head you took off.
Did Jay pic up the 2nd one?
Do u still have that 2nd Garelli 226001 head? Is it the smooshed one or the good one in the last pics. If it's the damaged one, is it still a useable? Does this fit the Polini 70 cc team kit on Treats?
Red, I'm interested, PM sent.
Molly, God forbid something would happen to this "pending purchase". Place me first inline, I will bye them should same fall through.
Thats what I was thinking. How deep, all the way to cylinder? Is that the kit i've seen on Treats? Thanks for the confirmation, and info.
OK, I had the color ID on those cylinders incorrect. Red high, white low compression. The pic is the white right, red left. Old cylinder white on right , new cylinder red on left.Is this correct that the high compression opening should be narrower on the high compression side?
Just recieved NOS cylinder kit. It appears to be a low compression (red dot) with fiat top piston. The original is a high compression cylinder (white dot) with dome top piston. Any known issues using this replacement NOS cylinder? I also have a NOS Gulp Matic crank, can I use it, since case already cracked open? Reference a prior post,(5-27-2019 by Yugi Trall), it appears the Gulp One Speed cran
So this is where I'm at on this rebuild. Replaced seals & bearings. Crank rod has maybe a thirty-second play in it. Flex-Honed the cylinder. The groves in the cylinder still exist, you can feel them dragging finger nail, however not hanging up as it did before. Do I keep Flex-Honing, go to a different type honing method or is it toast?
Recently purchased this moped. Previous owner cut the start/stop switch, threw it away. Would someone who has a stock VIP take a pic of the back, post it here. I have a replacement, not sure of wire sequence. It also doesn't have a starter (clutch) lever. If someone has a spare I could bye, I need one. Could use the length of the cable, I may have one. Thanks.
I hoped maybe you were headed to the midwest. Mopeds you put out awesome, I would of had a few of them had you been closer.
I know I want to buy it! HA! My bad.
Any Idea what it would cost to ship to 63119?
WOW, burn the house down, had to get those things hot!! Worked great. Be taking my time going forward,Thanks.