Results 1–30 of 144
1. Re: Zündapp type 444 torque build. Info needed
Forum: Performance
I actually got the hack and weld special circuit pipe off treatland for the build! Forgot to mention that in my first post.
2. Re: Isodyne (M1) crank
Forum: Buy + Sell
If you’d like I got a m1 isodyne that the threads on the crankshaft need to be fixed… it’s also got a custom intake I was designing for a larger sized carb. Might make good power. Idk?If you throw $10 on top of shipping you can totally have the whole engine.Though I see you are from Canada. Not close to Simcoe Ontario are you? Save shipping it?
3. Zündapp type 444 torque build. Info needed
Forum: Performance
Hey everyone!I’ve purchased a Zündapp type 444 engine off eBay and are awaiting for it to arrive in the mail. My understanding is that these were already sorta a good base for torque with the longer intake. Just seeing if anyone can think of or knows what would add to this to make it more better for my application?I know a few things that will help are;Port wide, not tallLong intake(?)Tall gearing
4. Re: Isodyne (M1) crank
Forum: Buy + Sell
https://www.ebay.ca/itm/304544813523?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=RnamgjVrQyO&sssrc=2349624&ssuid=pvSAwxLZSqu&var=&widget_ver=artemis&media=COPY
5. Re: Looking for a engine for dirtped up to $200 shipped willing to
Forum: Buy + Sell
It’s going on a motobecane. But I plan on not having a huge amount of the lower frame left over after I swap on a new engine.
6. Re: Looking for a engine for dirtped up to $200 shipped willing to
Forum: Buy + Sell
Could you attach photos to ad? Just so I have a rough idea of what’s all there visually?
7. Looking for a engine for dirtped up to $200 shipped willing to
Forum: Buy + Sell
Looking for a motor for the dirtped project. Got some serious spending more now so willing to take on a good motor or a used motor in need of rebuild.Will be somewhat picky on the motor as it needs to fit the build.
8. Re: Your (junk) motor
Forum: Buy + Sell
Still looking for a motor. I should have wrote the original part better. Looking to be into the MOTOR for around $50 but willing to spend more on shipping.
9. Dirtped vlog
Forum: General Discussion
Hey everyone! I’ve decided to film my work on probably the worst designed dirtped possible. If you wanna come see the utter chaos that will be this build be sure to check it out.Keep in mind I’m a total noob and will try my best but make no promise on video quality. Won’t be anywhere near as good as Cornped Maize.
10. Re: Your (junk) motor
Forum: Buy + Sell
There’s a tomos a5 not too far from me. Just waiting on a reply about when to come pick it up. I’m totally planning on using that as long as he doesn’t sell it on me before hand.Apparently it’s a runner for cheap. Plus he’s got some other parts I plan to pick up while I’m there like mag wheels. Though I’m not planning on using those for the dirtped
11. Re: WTB - Any moped for my emoped project, southern ontario
Forum: Buy + Sell
Is this a specific style frame you are looking for? I’d got a rigid frame motobecane cady that’s got all the parts minus side covers that’s got a bad motor in it?
12. Your (junk) motor
Forum: Buy + Sell
Looking to buy any or all junk motors. As long as it’s mostly complete if it’s a obscure engine or missing pieces if it’s a common one. Only want to be in it for about $50 as I’m planning on building a dirtped and need a engine for the frame I’m building.
13. Cady custom intake takeover
Forum: General Discussion
Looking for someone to take over the cady intake build. I will ship it to someone that will for sure attempt to see it through.I’ve talked about it in the past. My dandy walker malformation. It has progressed to the point were I have a count down. I’d like to help the community that has been such a caring and thoughtful one with my journey.All I ask is if you would like to take over the build that
14. 1953 malaguti europino $500
Forum: Buy + Sell
For sale is my 1953 malaguti europino.Runs with Canadian Ontario ownership.Asking $500 cad. Not willing to ship
15. Re: Lf: cady motor/bottom end
Forum: Buy + Sell
Attaching the photo of the piece when it was in rough stage of design
16. Lf: cady motor/bottom end
Forum: Buy + Sell
Looking for a cady motobecane bottom end. The di-moby motor to be specific.Need it for testing a piece I’ve built. But I’ve messed up the crank on the motor I have.Willing to buy a complete motor or bottom end as long as the crankshaft is good.Need shipped to simcoe, Ontario, Canada.N3Y-0B3
17. Re: Moped Shipping
Forum: General Discussion
Maize did a amazing video showing to use pirate shipping. Came to around $100 for a whole bike
18. Re: Unreasonable offer for parts?
Forum: General Discussion
Honestly maize, I love your videos along with graham doing that shipping video.Don’t get me wrong I’m sure pirate shipping is great. But the only note I need to add to that and it doesn’t affect most people here is it only works if it’s originating in USA.I tried using it to ship a moped after your video to a guy named Steve in Florida. It ended up back firing cause it needed to start in the state
19. Malaguti Europino shifty50
Forum: Buy + Sell
I bought this malaguti recently that looks to be a europino model. Tank is fairly solid inside. All the main parts are there. Has a complete and running on spray Franco Mornini M3 series engine in it.Clean title as it’s never been registered before.Would like to trade it for a cool project. The Italian look is hard to beat. But I need something simple to work on as my brain malformation is getting
20. Re: WTB: Puch Maxi Front Fender
Forum: Buy + Sell
How exactly can you tell if it’s a narrow version? I have a silver/grey one off a 1975 puch maxi
23. Malaguti EU 3M info?
Forum: General Discussion
Looking for someone who can help me out with figuring out what I have. It’s a shifty 50 M3 motor on a malaguti that everything looks like it was done factory. But I can’t find much information about it or what it’s value is. I picked it up on a whim for $100 knowing parts of the bike were worth it. Guy I bought it from was given it for free and never touched it. I got it to fire after some spray
24. Re: Cady intake mod
Forum: Performance
If you are planning to do this mod. I def recommend putting the bolt for the intake side of the flange in before welding it in place. Won’t be able to get the bolt in afterwards if you do
26. Puch maxi roller
Forum: Buy + Sell
Looking to sell my Puch Maxi Roller. I’m located in Simcoe, Ontario, Canada.Willing to ship. Buyer pays shipping.Amount: No clue what it’s worth. Send me a offer and we can make a deal.The good:Frame looks to be straight.Gas tank holds fluids fine.Drop a motor in ready.Comes with handle bars and fender that aren’t in the photo.The bad:No tiresNo engineNo side coversThe ugly:There is rustNo ownersh
27. Re: Cady intake mod
Forum: Performance
Soapy water. I’ve tested for air leaks before in tires. I sprayed soapy water on the welded/soldered area and then put a air hose to it. And also built some pressure in it by blocking off both ends and have air blown and held in it
29. Re: Cady intake mod
Forum: Performance
I did fill it with water before mounting it. Along with put the air gun to it for leaks and didn’t find it with either.
30. Re: Cady intake mod
Forum: Performance
I don’t have a photo of it completely done. But the intake system works!Definitely getting more power out of the bike with a larger intake and carb. Will get new tires and tubes and a more fat person friendly seat. Then I should be good to go do a top speed test.