is there anything out there? ive found a few but there is no mention of stud spacing. i normally end up using rubber hose elbows but the silicon ones are shiny and too slippery.
the polini cases come with a straight out intake and there is no room for a phbg due to engine swing.
i welded up a segmented mild steel one but thats far from ideal
(my tig welder wont do aluminium)
should be getting more of these in soonish https://www.treatland.tv/motobecane-AV10-PHBG-21mm-intake-with-integrated-s-p/mbk51-polini-intake-21mm-phbg.htm
> iskra chornia wrote:
> -------------------------------------------------------
> should be getting more of these in soonish
I want to run a 3d printed intake! I love how they have the stuffers built right into them as well, very cool
Calder, how many did you guys sell on the first round? Did you hear back if they are holding up?
Kinda looked like you might have only got a couple in, I'm definitely waiting to hear how they do long term. It looks like glass filled nylon SLS which is pretty good but seems like it might not work long term with the stress
Build a hanger to lower the engine!
i might just have to do that. i did it on my paloma dasl 2 yrs ago. its not lowering it needs but moving forwards.
Want to post in this forum? We'd love to have you join the discussion, but first: