Slapped a 40 tooth in the back and toned down the clutch again, maybe a little too much kinda just maws until it grabs. Got to 40mph. Seems as if power falls off after 7k. Pulls ok, definetly lost torque going down 5 teeth in the rear. But it pulls me at 220lbs to 40mph at 18/40. I'd call that pretty stout for a stock cylinder. Very torquey at 15/45 and 18/45. Feels like a cheap 44 or 45mm kit until 30-35mph. Might go up on the exhaust. Its only at 150, I can probably bring it up to 160-165 without much loss on the low end and another few degrees on the intake, I have like no blow back right now.