Re: The least sketchy way to do this sealed bearing conversion

EH ๐Ÿ“ฃFCC of the QCB /
This single post is part of a larger thread. Start from the top or view this post in context.

Damn! That is nice. I just used an old ZA clutch spring GUIDE? Not sure what they are called but the band that goes around the clutch segments where the spring sits. It has also worked for years. Access to a lathe is awesomeโ€ฆ.very jealous.

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  The least sketchy way to do this sealed bearing conversionTopic by: * wormdirt * * wormdirt * 03/16/22 04:59PM
  Re: The least sketchy way to do this sealed bearing conversionRe: Mike Boyd Mike Boyd 03/16/22 05:10PM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/16/22 05:22PM
  Re: The least sketchy way to do this sealed bearing conversionRe: Mike Boyd Mike Boyd 03/16/22 05:23PM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/16/22 05:54PM
  Re: The least sketchy way to do this sealed bearing conversionRe: Graham Motzing Graham Motzing 03/16/22 05:38PM
  Re: The least sketchy way to do this sealed bearing conversionRe: EH ๐Ÿ“ฃFCC of the QCB EH ๐Ÿ“ฃFCC of the QCB 03/16/22 06:05PM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/16/22 06:34PM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/16/22 07:08PM
  Re: The least sketchy way to do this sealed bearing conversionRe: Mike Boyd Mike Boyd 03/16/22 07:47PM
  Re: The least sketchy way to do this sealed bearing conversionRe: Full Tuck Full Tuck 03/16/22 07:21PM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/16/22 07:23PM
  Re: The least sketchy way to do this sealed bearing conversionRe: P D P D 03/16/22 07:37PM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/16/22 07:49PM
  Re: The least sketchy way to do this sealed bearing conversionRe: Mike Boyd Mike Boyd 03/16/22 07:55PM
  Re: The least sketchy way to do this sealed bearing conversionRe: ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin 03/16/22 08:56PM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/16/22 09:54PM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/16/22 09:58PM
  Re: The least sketchy way to do this sealed bearing conversionRe: ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin 03/16/22 10:58PM
  Re: The least sketchy way to do this sealed bearing conversionRe: EH ๐Ÿ“ฃFCC of the QCB EH ๐Ÿ“ฃFCC of the QCB 03/16/22 11:10PM
  Re: The least sketchy way to do this sealed bearing conversionRe: ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin 03/17/22 02:33PM
  Re: The least sketchy way to do this sealed bearing conversionRe: P D P D 03/17/22 06:04PM
  Re: The least sketchy way to do this sealed bearing conversionRe: ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin 03/17/22 06:27PM
  Re: The least sketchy way to do this sealed bearing conversionRe: P D P D 03/17/22 07:02PM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/17/22 07:11PM
  Re: The least sketchy way to do this sealed bearing conversionRe: ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin 03/17/22 10:02PM
  Re: The least sketchy way to do this sealed bearing conversionRe: P D P D 03/18/22 10:18AM
  Re: The least sketchy way to do this sealed bearing conversionRe: ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin ๐Ÿ‡ฎ๐Ÿ‡น๐Ÿ’ฆ Of the Loin 03/18/22 11:07AM
  Re: The least sketchy way to do this sealed bearing conversionRe: P D P D 03/18/22 11:36AM
  Re: The least sketchy way to do this sealed bearing conversionRe: CORN PED CORN PED 03/18/22 11:46AM
  Re: The least sketchy way to do this sealed bearing conversionRe: CORN PED CORN PED 03/17/22 10:56PM
  Re: The least sketchy way to do this sealed bearing conversionRe: Mike Boyd Mike Boyd 03/17/22 01:03AM
  Re: The least sketchy way to do this sealed bearing conversionRe: Full Tuck Full Tuck 03/17/22 09:03AM
  Re: The least sketchy way to do this sealed bearing conversionRe: P D P D 03/17/22 11:30AM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/17/22 02:05PM
  Re: The least sketchy way to do this sealed bearing conversionRe: * wormdirt * * wormdirt * 03/18/22 12:17AM
  Re: The least sketchy way to do this sealed bearing conversionRe: Garrett The Kid Garrett The Kid 03/18/22 01:56PM
  Re: The least sketchy way to do this sealed bearing conversionRe: Michael Gamba Michael Gamba 04/29/22 02:11PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account