Re: New Peugeot Airsal Cranks?

Garelli Master✨ /
This single post is part of a larger thread. Start from the top or view this post in context.

> Graham Motzing wrote:

> -------------------------------------------------------

> > Stephen Simmons wrote:

>

> > -------------------------------------------------------

>

> > What I've noticed is usually crankshafts under $99 doesn't have a hole

>

> > drilled on the small end

>

> Good point, I've scattered a couple small end bearings but never really

> paid much attention to the hole being there or not. I have drilled them

> out and chamfered bushing ones, but I don't know if the roller needs

> that much oil?

I've scattered a few in rods without the hole. Never have I in rods with the hole.

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account