Re: The design of a new puch cylinder

Jurrian Mulder /
jurrian
Nov 29, 2021 04:11PM
This single post is part of a larger thread. Start from the top or view this post in context.

> Josh G wrote:

> -------------------------------------------------------

> Big Fins! 45mm is still the race-spec bore?

Yess, along with a 43mm stroke and air-cooled.

Reply
This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  The design of a new puch cylinderTopic by: Jurrian Mulder Jurrian Mulder 01/14/21 09:11AM
  Re: The design of a new puch cylinderRe: Beach Club Nick Beach Club Nick 01/14/21 09:13AM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 01/14/21 09:17AM
  Re: The design of a new puch cylinderRe: Ľ̷̝̽͒i̶̛̼͑͠ȁ̸̧̛̽m̵̻̟̯̀̅ ̷͎̙̽̊F̶̲̺͑̓ F Ľ̷̝̽͒i̶̛̼͑͠ȁ̸̧̛̽m̵̻̟̯̀̅ ̷͎̙̽̊F̶̲̺͑̓ F 01/14/21 09:55AM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 01/14/21 10:16AM
  Re: The design of a new puch cylinderRe: Probably Fred Probably Fred 01/14/21 11:52AM
  Re: The design of a new puch cylinderRe: Dirty30 Dillon Dirty30 Dillon 01/14/21 01:48PM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 01/14/21 01:56PM
  Re: The design of a new puch cylinderRe: Buttcheeks BUZZARD Buttcheeks BUZZARD 01/14/21 12:50PM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 01/14/21 02:02PM
  Re: The design of a new puch cylinderRe: EH 📣FCC of the QCB EH 📣FCC of the QCB 01/14/21 08:16PM
  Re: The design of a new puch cylinderRe: operator error 696 420 operator error 696 420 01/15/21 08:45PM
  Re: The design of a new puch cylinderRe: operator error 696 420 operator error 696 420 01/14/21 01:26PM
  Re: The design of a new puch cylinderRe: Johnny Braaapp Johnny Braaapp 01/15/21 09:47AM
  Re: The design of a new puch cylinderRe: 🦺🥇b to the MOPO 🚨🚨🚨 eff 🦺🥇b to the MOPO 🚨🚨🚨 eff 01/15/21 10:47AM
  Re: The design of a new puch cylinderRe: Josh G Josh G 01/15/21 01:27PM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 03/29/21 04:33AM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 11/29/21 09:17AM
  Re: The design of a new puch cylinderRe: Josh G Josh G 03/29/21 07:47PM
  Re: The design of a new puch cylinderRe: Probably Fred Probably Fred 03/29/21 08:34PM
  Re: The design of a new puch cylinderRe: Josh G Josh G 11/29/21 02:00PM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 11/29/21 04:11PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 11/29/21 05:18PM
  Re: The design of a new puch cylinderRe: Eric Davenport Eric Davenport 11/29/21 05:36PM
  Re: The design of a new puch cylinderRe: Jesse Stephenson Jesse Stephenson 11/29/21 07:07PM
  Re: The design of a new puch cylinderRe: Josh G Josh G 11/30/21 02:20PM
  Re: The design of a new puch cylinderRe: Dickie Gila Dickie Gila 11/30/21 10:24PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/01/21 12:05AM
  Re: The design of a new puch cylinderRe: LSLB RXb LSLB RXb 12/01/21 12:03PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 11/30/21 06:40PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 11/30/21 06:41PM
  Re: The design of a new puch cylinderRe: Oil Stainz Oil Stainz 12/01/21 01:06AM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/01/21 11:12AM
  Re: The design of a new puch cylinderRe: E BinOH E BinOH 12/01/21 12:55PM
  Re: The design of a new puch cylinderRe: Dickie Gila Dickie Gila 12/01/21 01:49PM
  Re: The design of a new puch cylinderRe: Josh G Josh G 12/01/21 03:46PM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 12/01/21 03:52PM
  Re: The design of a new puch cylinderRe: Jay Rivett Jay Rivett 12/03/21 11:02AM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/03/21 02:11PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/06/21 10:01AM
  Re: The design of a new puch cylinderRe: nick s nick s 12/03/21 01:29PM
  Re: The design of a new puch cylinderRe: nick s nick s 12/06/21 03:14PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/06/21 04:13PM
  Re: The design of a new puch cylinderRe: daan SJAARLOOS daan SJAARLOOS 12/09/21 08:15AM
  Re: The design of a new puch cylinderRe: Douglas Binder Douglas Binder 12/09/21 08:28AM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/09/21 09:54AM
  Re: The design of a new puch cylinderRe: nick s nick s 12/06/21 04:48PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/06/21 05:12PM
  Re: The design of a new puch cylinderRe: Josh G Josh G 12/07/21 02:31PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/07/21 03:56PM
  Re: The design of a new puch cylinderRe: Josh G Josh G 12/07/21 07:28PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/07/21 08:26PM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 12/08/21 03:18AM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 12/08/21 04:45AM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/08/21 10:38AM
  Re: The design of a new puch cylinderRe: Douglas Binder Douglas Binder 12/08/21 11:12AM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 12/08/21 01:58PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/08/21 02:31PM
  Re: The design of a new puch cylinderRe: Josh G Josh G 12/08/21 02:33PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/08/21 02:39PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/08/21 08:44PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 12/08/21 08:44PM
  Re: The design of a new puch cylinderRe: P D P D 12/08/21 08:50PM
  Re: The design of a new puch cylinderRe: Josh G Josh G 01/12/22 04:50PM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 01/13/22 02:47AM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 01/13/22 09:48AM
  Re: The design of a new puch cylinderRe: Jay Rivett Jay Rivett 01/13/22 10:38AM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 01/13/22 12:54PM
  Re: The design of a new puch cylinderRe: P D P D 01/13/22 08:22PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 01/23/22 04:26PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 01/23/22 05:51PM
  Re: The design of a new puch cylinderRe: James P James P 01/23/22 06:04PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 01/24/22 12:45PM
  Re: The design of a new puch cylinderRe: Douglas Binder Douglas Binder 02/14/22 03:23PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 02/14/22 05:49PM
  Re: The design of a new puch cylinderRe: Douglas Binder Douglas Binder 02/15/22 11:46AM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 02/15/22 01:05PM
  Re: The design of a new puch cylinderRe: Jay Rivett Jay Rivett 02/15/22 11:10AM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 02/15/22 11:19AM
  Re: The design of a new puch cylinderRe: Josh G Josh G 01/24/22 02:36PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 01/24/22 03:05PM
  Re: The design of a new puch cylinderRe: Josh G Josh G 01/24/22 03:52PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 01/24/22 05:32PM
  Re: The design of a new puch cylinderRe: ALAN REA ALAN REA 01/24/22 05:49PM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 01/25/22 04:22AM
  Re: The design of a new puch cylinderRe: Jurrian Mulder Jurrian Mulder 01/16/23 03:57AM
  Re: The design of a new puch cylinderRe: Josh G Josh G 02/14/22 07:00PM
  Re: The design of a new puch cylinderRe: Graham Motzing Graham Motzing 02/14/22 09:25PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account