#1, don’t hijack threads.
#2, you’re running 6 x 6 gram rollers? Lol
Wayyyyyyyyyyy too heavy
Lighten your shit up a ton dawg
> Moped Newbie Wrote:
> -------------------------------------------------------
> I am having some issues with a Start V and bogging. My initial
> inclination was carb mistuning but after reading this, I am thinking it
> could be a variation issue. This is my first variated bike.
>
> Start V with 65 cc metrakit, TM24 (15 idle jet, 165 main jet, middle
> needle position, 5n13 needle) 6 gram weights, 16/33 gearing, removed
> starter clutch, stock contra and variator. Rk replica huge moped pipe w/
> black baffle. Malossi reeds. Timing 1.8mm. No air leaks with leak down
> test.
>
> The bike idles and revs without on the stand without issues. The bike is
> 4 stroking with acceleration - a lot at 1/2 to WOT and less frequently
> at WOT. The bike accelerates decently until 1/2 throttle then there is a
> lot of hesitation and losing of power and spitting gas.
>
> I have tried leaning the main down to 115 and needle position but this
> makes the bike run worst and there is still a lot of 4 stroking in the
> mid range. The plug looks to be on the richer side but not bad. The head
> temps hang around high 200s. Leaning up the main jet did improve the
> spitting of gas.
>
> How can I tell if it is carb tuning or variator tuning?