Alright so the first three that went out will all have the pin stick out a little bit. I drilled the rest in my possesion so the pin will sit in all the way. Also updated the design to reflect the correct sizing.
After talking to Emil about getting the pin out and them using pliars to get it out; I took a crack at not ruining one to get the metal parts. I used an o-ring pick and pushed through the plastic just enough to push the pin out a few mm and grab it with pliars. Top is still usable.
Thanks Graham! I think you're right but I never felt like posting on their forums. I thought the same with the slide and once treats started selling them I hoped they'd find them there.