> Nico . wrote:
> I got a MLM Techno Circuit EDM pipe a few months ago and have had to
> weld it together a few times already. I really like the pipe itself,
> good take off and pretty good medium range, top speed with it was 47mph
> once down hill going full speed tuck and WOT. Average around 37 and can
> hit low 40's most of the time.
> The baffle was pretty loose on the pipe and instead of being smart and
> getting a stronger spring I tried tack welding it on and now it keeps
> breaking at the baffle and have had to re-weld it like 3 times.
> It also hit the peddles slightly and scraped some paint but that's not a
> major issue. The bigger issue was the belt hitting it when fully
> verriated (I can't figure out how to spell that) so I had to put a nice
> dent in the pipe to get it to clear the belt.
> Peugeot 103, stock engine, Dellorto SHA 15, Malossi SHA 4 petal reed
> block, 74 jet, MLM Techno EDM Circuit Exhaust.
I purchased the MLM Techno EDM pipe from Treats a while back and just put it on yesterday. The pipe sounds pretty fucking cool and seems to work well with my Moby (Sha15, Le Partie, Airsal 74cc, 74 jet). Although, it definitely does not match up with the mounting bracket on my av7 - had to saw the pipe bracket and drill my own holes to get it on.
Only thing that sucks is the piece that connects the baffle to the rest of the pipe broke... Anyone know if I can use JB Weld for that shit or should I just go hit up my buddy to weld it? I mean, the answer is obvious but I guess i'm searching for validation lol.
Anyways, cool pipe but broke after one use. Zip tying the mounting bracket to my bike temporarily until I could get to the hardware store today for some mounting supplies is probably what caused it to break.