Diablo will be Flat reeded

todd amundson /

Hello,

I have started a new project for my friend Jake. He brought over a Derbi Diablo rolling chassis and a crazy flat reed motor that Tyler built in Sacramento. The plan is to chop off the rear swinging Pyramid mount and widen it to accept the flat reed ass. Then, once the rear is aligned up and down with the chain and side to side, I will make the upper mount.

Now Iv'e seen some rad flat reeded Diablos online such as the 1977 build and others in the garage. There's even a build there for the front mount but it's one picture and the description is hard to understand.

So right now this is the hard part because I can't really see in the photos out there how people fabricated their upper mounts. It's not too clear. Guessing I'll end up getting creative.

IMG_0649.JPG

IMG_0652.JPG

IMG_0650.JPG

Subject Written By Posted
  Diablo will be Flat reededTopic by: todd amundson todd amundson 07/06/17 08:51PM
  Re: Diablo will be Flat reededRe: Dan O Dan O 07/06/17 09:21PM
  Re: Diablo will be Flat reededRe: Dan O Dan O 07/06/17 09:34PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 07/06/17 11:47PM
  Re: Diablo will be Flat reededRe: Dave & Bummerzz Dave & Bummerzz 07/07/17 08:03AM
  Re: Diablo will be Flat reededRe: Graham Motzing Graham Motzing 07/07/17 01:12PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 07/07/17 01:21PM
  Re: Diablo will be Flat reededRe: Daniel '' Daniel '' 07/07/17 01:23PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 07/07/17 01:29PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 07/07/17 01:27PM
  Re: Diablo will be Flat reededRe: - Dacruzer - - Dacruzer - 07/07/17 03:52PM
  Re: Diablo will be Flat reededRe: Graham Motzing Graham Motzing 07/07/17 06:14PM
  Re: Diablo will be Flat reededRe: Dan O Dan O 07/09/17 04:51PM
  Re: Diablo will be Flat reededRe: Dave & Bummerzz Dave & Bummerzz 07/10/17 09:40AM
  Re: Diablo will be Flat reededRe: Dirty30 Dillon Dirty30 Dillon 08/08/17 02:49PM
  Re: Diablo will be Flat reededRe: Dan (LandLordsMG/PSVMC) Dan (LandLordsMG/PSVMC) 08/11/17 03:02PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 07/11/17 11:27AM
  Re: Diablo will be Flat reededRe: Ryan N. Ryan N. 07/11/17 12:05PM
  Re: Diablo will be Flat reededRe: reynie domingo reynie domingo 07/11/17 03:38PM
  Re: Diablo will be Flat reededRe: Dave & Bummerzz Dave & Bummerzz 07/11/17 03:58PM
  Re: Diablo will be Flat reededRe: niklaus g niklaus g 07/17/17 09:38PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 08/07/17 01:31AM
  Re: Diablo will be Flat reededRe: Baron Von Hamilton Baron Von Hamilton 08/07/17 07:49AM
  Re: Diablo will be Flat reededRe: Richard Schwartz Richard Schwartz 08/07/17 07:27AM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 08/08/17 11:55AM
  Re: Diablo will be Flat reededRe: A2 Andrew A2 Andrew 10/19/17 01:59PM
  Re: Diablo will be Flat reededRe: mit mortso mit mortso 08/16/17 04:39PM
  Re: Diablo will be Flat reededRe: Jason Grimm Jason Grimm 08/17/17 05:22PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 10/17/17 01:55PM
  Re: Diablo will be Flat reededRe: Ryan Mc Ryan Mc 10/17/17 03:46PM
  Re: Diablo will be Flat reededRe: Ken Roff Ken Roff 10/17/17 04:23PM
  Re: Diablo will be Flat reededRe: Mike Ciric Mike Ciric 10/26/17 12:06PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 12/01/17 01:08AM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 01/14/18 04:11PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 12/01/17 01:35AM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 12/01/17 01:38AM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 02/09/18 11:56AM
  Re: Diablo will be Flat reededRe: JBOT Admin JBOT Admin 02/09/18 12:11PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 02/09/18 12:39PM
  Re: Diablo will be Flat reededRe: todd amundson todd amundson 03/03/18 02:52PM
You must log in before posting to this forum.

Click here to login.