QT50 60cc keeps seizing.
got an 86 qt50. after cleaning the exhaust and giving it a tune up it ran mint.
shortly after i installed a 60cc kit with the stock head, bike soft seized twice. no matter how rich i tried it always kept getting hot.
my current setup is yt60 jug
ngk bp7hs plug
pw80 carb (jetted rich)
and a pocket bike muffler welded to stock header.
bike runs pretty good.
occasionally will bog at wot because its rich
but after about a 8 mile ride today it soft seized again on my way home.
im running one base and 2 head gaskets
i was considering picking up a 70cc high compression head off treats but dont know if that will help my cooling issue
any help is appreciated.
|Justin Cabral||06/19/14 08:14PM|
|Ken Roff||06/19/14 08:20PM|
|Justin Cabral||06/19/14 08:26PM|
|Dave & Bummerzz||06/19/14 09:26PM|
|matt boda1nz||06/19/14 10:39PM|
|matt boda1nz||06/19/14 09:54PM|
|Arlie Endsley||06/19/14 11:01PM|
|Justin Cabral||06/20/14 09:20AM|
|Nick Dedic||06/20/14 09:42AM|
|Arlie Endsley||06/20/14 10:07AM|
|Arlie Endsley||06/20/14 10:22AM|
|Michael Thomas||06/20/14 11:06AM|
|Todd Keingeshaft||06/20/14 11:35AM|
|Mark B******||07/08/14 09:50PM|
|Todd Keingeshaft||07/10/14 10:54AM|
|Arlie Endsley||06/20/14 02:39PM|
|Todd Keingeshaft||06/21/14 03:10PM|
|matt boda1nz||06/20/14 02:55PM|
|matt boda1nz||06/20/14 06:40PM|
|Justin Cabral||06/20/14 03:45PM|
|Justin Cabral||06/20/14 03:46PM|
|Justin Cabral||06/20/14 04:57PM|
|matt boda1nz||06/20/14 06:42PM|
|Justin Cabral||06/21/14 09:30AM|
|Arlie Endsley||06/21/14 04:33PM|
|Justin Cabral||06/21/14 09:11PM|
|Todd Keingeshaft||06/22/14 05:09PM|
|Glenn Kuehn||06/21/14 10:05PM|
|Arlie Endsley||06/21/14 10:57PM|
|matt boda1nz||06/22/14 11:28PM|
|Arlie Endsley||06/22/14 11:45PM|
|Justin Cabral||06/25/14 09:42AM|
|Nick Dedic||06/26/14 10:46AM|
|Nick Dedic||06/26/14 10:53AM|
|Nick Dedic||07/08/14 10:06PM|
|Jason S.s||07/08/14 11:38PM|
|Arlie Endsley||07/10/14 11:38AM|