Re: HPI mini on ZA50 - adding weight

Big Al's Moped Shop /
This single post is part of a larger thread. Start from the top or view this post in context.

I’m glad this has been on someone else’s mind. I just pulled the bike out of the basement and into the garage last week. So Excited!! It took forever getting the bodywork right on one of those repop magnum tanks. I'll never buy another one of those things again, uggg so much work.. I only have about 10 minutes of run time on the motor… But Ken's right, I put HPI on this motor to keep temps down. Its an overbored large port metra 80 with MM Destroyer. My gearing is also limited right now with those 3 stars 20/37. The limitation of speed will drive me nuts especially after watching Rodney's experiment.

I set the timing a little conservative at 1.8 BTC, used a 10 idle and 160 main on a TM24.. It was a little fussy on initial start up and didnt want to idle. I switched to a 12.5 idle and it idles well. Ill test a 15. With the weight mounted it's still 300 grams lighter than stock. I was going to go on the maiden voyage today after work but the dumb arctic funnel is still here:( but yeah I wanted to thank TREATS and HPI. This rotor weight was under 50$ made of stainless, and fit perfectly...and thanks Ken for the tank mount! I'll report back when I can do some testing with and without the weight.

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  HPI mini on ZA50 - adding weightTopic by: Big Al's Moped Shop Big Al's Moped Shop 01/02/14 09:24PM
  Re: HPI mini on ZA50 - adding weightRe: Kevin Hurt Kevin Hurt 01/02/14 09:40PM
  Re: HPI mini on ZA50 - adding weightRe: Kevin Hurt Kevin Hurt 01/02/14 09:55PM
  Re: HPI mini on ZA50 - adding weightRe: Kevin Hurt Kevin Hurt 02/26/14 08:53PM
  Re: HPI mini on ZA50 - adding weightRe: Big Al's Moped Shop Big Al's Moped Shop 02/27/14 08:30AM
  Re: HPI mini on ZA50 - adding weightRe: Saabsonettguy . Saabsonettguy . 01/02/14 10:44PM
  Re: HPI mini on ZA50 - adding weightRe: Matt Mahloch -- MBM Customs Matt Mahloch -- MBM Customs 01/02/14 10:55PM
  Re: HPI mini on ZA50 - adding weightRe: Dirty30 Dillon Dirty30 Dillon 01/02/14 11:06PM
  Re: HPI mini on ZA50 - adding weightRe: Matt Mahloch -- MBM Customs Matt Mahloch -- MBM Customs 01/02/14 11:11PM
  Re: HPI mini on ZA50 - adding weightRe: Big Al's Moped Shop Big Al's Moped Shop 01/03/14 01:13AM
  Re: HPI mini on ZA50 - adding weightRe: Probably Fred Probably Fred 01/03/14 02:19AM
  Re: HPI mini on ZA50 - adding weightRe: Buttcheeks BUZZARD Buttcheeks BUZZARD 01/03/14 02:57PM
  Re: HPI mini on ZA50 - adding weightRe: Probably Fred Probably Fred 01/03/14 03:05PM
  Re: HPI mini on ZA50 - adding weightRe: cj cj cj cj 01/29/14 02:41PM
  Re: HPI mini on ZA50 - adding weightRe: Big Al's Moped Shop Big Al's Moped Shop 01/29/14 03:09PM
  Re: HPI mini on ZA50 - adding weightRe: Dirty30 Dillon Dirty30 Dillon 01/29/14 03:14PM
  Re: HPI mini on ZA50 - adding weightRe: Ryan . Ryan . 01/03/14 03:56PM
  Re: HPI mini on ZA50 - adding weightRe: Graham Motzing Graham Motzing 01/03/14 04:54PM
  Re: HPI mini on ZA50 - adding weightRe: Big Al's Moped Shop Big Al's Moped Shop 01/03/14 05:16PM
  Re: HPI mini on ZA50 - adding weightRe: Ryan . Ryan . 01/04/14 12:28AM
  Re: HPI mini on ZA50 - adding weightRe: Big Al's Moped Shop Big Al's Moped Shop 01/29/14 12:23PM
  Re: HPI mini on ZA50 - adding weightRe: Daniel '' Daniel '' 01/29/14 01:12PM
  Re: HPI mini on ZA50 - adding weightRe: Big Al's Moped Shop Big Al's Moped Shop 01/29/14 01:19PM
  Re: HPI mini on ZA50 - adding weightRe: Deadped Ryan Deadped Ryan 02/27/14 09:49AM
  Re: HPI mini on ZA50 - adding weightRe: not a Baron Asshole not a Baron Asshole 02/27/14 11:02AM
  Re: HPI mini on ZA50 - adding weightRe: Probably Fred Probably Fred 02/27/14 04:33PM
  Re: HPI mini on ZA50 - adding weightRe: brian schulz brian schulz 02/28/14 08:52AM
  Re: HPI mini on ZA50 - adding weightRe: NB0tt aholetechbro NB0tt aholetechbro 04/29/14 05:30PM
  Re: HPI mini on ZA50 - adding weightRe: Probably Fred Probably Fred 04/29/14 06:27PM
  Re: HPI mini on ZA50 - adding weightRe: NB0tt aholetechbro NB0tt aholetechbro 04/30/14 10:21AM
  Re: HPI mini on ZA50 - adding weightRe: Big Al's Moped Shop Big Al's Moped Shop 04/30/14 10:27AM
  Re: HPI mini on ZA50 - adding weightRe: brian schulz brian schulz 05/02/14 08:16AM
  Re: HPI mini on ZA50 - adding weightRe: Big Al's Moped Shop Big Al's Moped Shop 04/29/14 08:39PM
  Re: HPI mini on ZA50 - adding weightRe: Mo Peds Mo Peds 04/30/14 10:29AM
  Re: HPI mini on ZA50 - adding weightRe: Big Al's Moped Shop Big Al's Moped Shop 04/30/14 06:00PM
  Re: HPI mini on ZA50 - adding weightRe: Marc Friedman Marc Friedman 04/30/14 06:31PM
  Re: HPI mini on ZA50 - adding weightRe: Dirty30 Dillon Dirty30 Dillon 05/02/14 01:22PM
  Re: HPI mini on ZA50 - adding weightRe: NB0tt aholetechbro NB0tt aholetechbro 05/02/14 01:03PM
  Re: HPI mini on ZA50 - adding weightRe: Marc Friedman Marc Friedman 05/02/14 01:17PM
  Re: HPI mini on ZA50 - adding weightRe: Marc Friedman Marc Friedman 05/02/14 02:18PM
  Re: HPI mini on ZA50 - adding weightRe: Dirty30 Dillon Dirty30 Dillon 05/02/14 02:28PM
  Re: HPI mini on ZA50 - adding weightRe: Big Al's Moped Shop Big Al's Moped Shop 05/15/14 12:55PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account