Re: unrestricting a sweet puch magnum 2

Michael Thomas /
This single post is part of a larger thread. Start from the top or view this post in context.

IF you want to keep the stock look of the bike, pull out the header pipe and drill four holes in the pipe, I am thinking 5/8" two up near the top and two near the bottom and replace. Get a 14mm carb and intake and upjet to 64-66, nylon over the air intake on the carb. Mine does about 33-35 with this setup.

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account