First off i need help identifying the actual brand/size bard i have. Secondly ive been having trouble with it leaking.. after i cleaned the float/jet a few days ago it was leaking a bunch, after messing with the gasket and other things a few times taking apart and putting back together, it stopped leaking at all and was running better than ever. now after not being driven for a day it seems to leaking again, only slightly and there is a small amount of fuel in bottom on the screen air flilter?? also seems to be a little bit slower on the top speed.
Carb Help?!?
Re: Carb Help?!?
You didn't ask a question.
Post a picture of the carb if you want help identifying it.
Re: Carb Help?!?
puch maxi e50
heres a pic of it
Re: Carb Help?!?
Sha
Re: Carb Help?!?
That's a Dellorto SHA. It should say on the side somewhere what size it is; like "15/15" or "14/12".
Re: Carb Help?!?
thanks, thought so.. any help with the leaking problems???
Re: Carb Help?!?
Yarp, adjust your float level. Check out this: http://www.allthingsmoto.com/forums/f-15/how-set-your-motorcycle-carburetor-float-level-13609/
Re: Carb Help?!?
If it is a small amount after running like less then a ounce then that is from reversion and is normal on a two stroke engine, usually more on a piston port motor then a reed valved motor, but still it is normal.
Want to post in this forum? We'd love to have you join the discussion, but first: