If i remember right one of you had problems with same pietcard box's on a V1 when Ed was the main supplier for moped pietcards.
Ed told me that xxxxxx was doing something wrong and fried two box's and gave him shit even tho Ed gave him two free replacements.
So what ever it is your doing something wrong in Portland.
Do let us all know with a wiring diagram how this needs to be setup to work.
Not trying to be an ass just saying.
So do you have it wired like this?
I do see a fuck up with the Treats instructions the voltage regulator housing needs to be grounded or it will not work.
1. move the brown ground wire on the white coil to the front of the coil.
2. install the stator, woodruff key, and flywheel onto the crank.
3. mount the pietcard 2041 box and the voltage regulator anywhere since they do not need to be grounded, and mount the HT coil somewhere on a nice strong ground somewhere on the frame of the moped.
4. wiring - from the stator, brown gets grounded, white goes to grey on pietcard, red goes to blue on pietcard, and yellow goes to yellow on voltage regulator. black on the pietcard gets grounded and red on pietcard connects to the only prong on the HT coil. from the voltage regulator, connect all lighting to the red wire.
P.S. is this on a ZA-50, E-50, A-55, derby, etc?
Arugula out (edited)