Re: peugeot 103 WIN!!!
i got these sweet weird 103 tank decals from hadybikes for TWO DAMN DOLLARS!!! i havent seen them anywhere else.
a few more little questions i came up with:
1) the pulley, mine has a bunch of play, it is free to walk around on the pedal shaft about 2.5 mm. am i missing some kind of bushing? is this normal? is there anywhere i can buy a new bearing for that thing? what kind of grease gun nozzle should i get, are thy hard to find? your taking to a guy who cut a brass puch con rod bushing in half to shim the rollerbearing in place in a 70cc piston. i left about 1mm of play. close to 100 high rpm miles so far, still rippin.
2) reed valves. i put a polini in there when i put my intake and carb on there. it seems fine, but what do you dudes run? anybody try the boyesen double flappy one? doppler?
3) my bike has a nice brown plug, and runs great. but the exhaust seems to smoke a little more than my other bikes and blow a bit more of oily gassy grey stuff everywhere than normal. are 103s just like that?
|mit mortso||02/04/10 03:04PM|
|mit mortso||02/04/10 03:08PM|
|mit mortso||02/05/10 04:09AM|
|Flagrant -||02/04/10 07:30PM|
|johno roberts||02/04/10 08:30PM|
|derbeez ryderz||02/04/10 11:21PM|
|mit mortso||02/05/10 04:08AM|
|mit mortso||02/06/10 05:26AM|
|mit mortso||02/06/10 05:27PM|
|Mr. Duncan||02/07/10 08:08PM|
|Nash .||02/07/10 11:27PM|
|mit mortso||02/08/10 03:14AM|
|Flagrant -||02/08/10 12:36PM|
|mit mortso||02/08/10 04:16PM|
|Flagrant -||02/08/10 04:37PM|
|Eric Sabatino||02/08/10 04:48PM|
|mit mortso||02/09/10 01:17PM|
|mit mortso||02/14/10 03:34AM|
|kyle uhl||12/04/12 04:23PM|
|nicholas cravedi||12/04/12 05:06PM|
|M-Tenn Aaron||12/04/12 06:36PM|
|nicholas cravedi||12/04/12 08:52PM|
|M-Tenn Aaron||12/04/12 09:56PM|
|Daniel ''||12/04/12 10:02PM|
|nicholas cravedi||12/04/12 11:01PM|
|M-Tenn Aaron||12/04/12 11:09PM|
|nicholas cravedi||12/04/12 11:23PM|