Re: Moby hardwiring question - 6v

Andy /
This single post is part of a larger thread. Start from the top or view this post in context.

pshh, that diagram is nothing.

I'd recommend not pulling the wiring out from your rear wheel hub, leave it, and pull the appropriate wire that goes to your tail light at the middle of the bike, where it comes in from under neath the rear wheel hub, connect that directly to your lighting coil.

Otherwise, you're gonna end up having to take the rear wheel off to get at the wires in there.

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  Moby hardwiring question - 6vTopic by: Ryan Ryan 01/24/10 08:39PM
  Re: Moby hardwiring question - 6vRe: Andy Andy 01/24/10 10:29PM
  Re:Re: Ryan Ryan 01/25/10 08:52AM
  Re:Re: Ian T Ian T 01/25/10 09:10AM
  Re:Re: Ian T Ian T 01/25/10 09:15AM
  Re:Re: Ryan Ryan 01/25/10 10:34AM
  Re: Moby hardwiring question - 6vRe: Andy Andy 01/25/10 08:53PM

Want to reply to this thread?

We'd love to have you join the discussion, but first you'll need to login (or create an account).