I opened up the exhaust to match the pipe, and polished it, did the same with the intake. didn't mess with the timing. I only polished the transfer ports. I also polished the piston crown, and the head down working all the way to 1000 grit. I'm hitting 37mph, (cyclometer). I've also side gaped my plug, and I'm noticing a bit more torque. Still using the 14mm bing.
Re: stock puch cylinder porting gains
|Mr. Duncan||01/19/10 12:28AM|
|Nash .||01/19/10 12:50AM|
|[[ Linda ]]||01/19/10 01:16AM|
|Ƽɧ▲ɴƹ β||01/19/10 01:30AM|
|Josh Schutz||01/19/10 04:02AM|
|smell my finger||01/19/10 04:43AM|
|Ƽɧ▲ɴƹ β||01/19/10 08:47AM|
|Mo Peds||01/19/10 11:06AM|
|Mo Peds||01/19/10 11:04AM|
|Flagrant -||01/19/10 03:46PM|
|Josh Schutz||01/20/10 02:43AM|
|Charlie BUZZARD||09/29/10 07:29PM|
Want to reply to this thread?