Re: getting speed out of a za50

Deadped Ryan /

Word.... paz has really good videos - the ones in the wiki. If you watch em' enough times while you're taking it apart it'll help.

SHANEB'S VIDEO IS WHAT HAPPENS WHEN YOU DON'T TORQUE DOWN TO SPEC!!!! GET A TORQUE WRENCH PEOPLE AND DON'T LOOSE YOUR SHIMS!!! That also can happen from not replacing pucks so do that too.

The link to the official puch za50 service manual is here:

http://www.mopedriders.org/html/manuals/puch/sm/puchsm.htm

If you look at the ZA50 sections (because the manual covers both ZA50 and e50) you will find flipping, disassembly, reassembling and check-ups will be much easier. Everything you need to know is in this manual. When you put the clutches back on, just put the second one on backwards - that simple!!! READ READ READ.

-Ryan

Subject Written By Posted
  getting speed out of a za50Topic by: Rowan Rowan 01/09/10 03:23PM
  Re: getting speed out of a za50Re: Sir Yancellot Sir Yancellot 01/09/10 03:32PM
  Re: getting speed out of a za50Re: derek derek 01/09/10 03:33PM
  Re: getting speed out of a za50Re: Deadped Ryan Deadped Ryan 01/09/10 05:06PM
  Re: getting speed out of a za50Re: Jake Harvey Jake Harvey 01/12/10 12:09AM
  getting speed out of a za50Re: Ƽɧ▲ɴƹ β Ƽɧ▲ɴƹ β 01/12/10 12:19AM
  Re: getting speed out of a za50Re: Ƽɧ▲ɴƹ β Ƽɧ▲ɴƹ β 01/12/10 01:37PM
  Re: getting speed out of a za50Re: Kit Carsick Kit Carsick 01/12/10 01:59PM
  Re: getting speed out of a za50Re: aph1979 aph1979 01/12/10 02:04PM
  Re: getting speed out of a za50Re: Ƽɧ▲ɴƹ β Ƽɧ▲ɴƹ β 01/12/10 02:50PM
  Re: getting speed out of a za50Re: soulremedy2 soulremedy2 01/12/10 03:20PM
  Re: getting speed out of a za50Re: Ƽɧ▲ɴƹ β Ƽɧ▲ɴƹ β 01/12/10 03:40PM
  Re: getting speed out of a za50Re: rofman rofman 01/12/10 06:27PM
  Re: getting speed out of a za50Re: [[ Linda ]] [[ Linda ]] 01/12/10 06:28PM
  Re: getting speed out of a za50Re: Ƽɧ▲ɴƹ β Ƽɧ▲ɴƹ β 01/12/10 11:30PM
  Re: getting speed out of a za50Re: soulremedy soulremedy 01/12/10 10:34PM
  Re: getting speed out of a za50Re: Charles Cole (OFMC) Charles Cole (OFMC) 01/13/10 03:28AM
  Re: getting speed out of a za50Re: Deadped Ryan Deadped Ryan 01/13/10 05:33AM
  Re: getting speed out of a za50Re: derek derek 01/13/10 11:18AM
  Re: getting speed out of a za50Re: Ƽɧ▲ɴƹ β Ƽɧ▲ɴƹ β 01/13/10 12:05PM
  Re: getting speed out of a za50Re: blake blake 01/20/10 05:41PM
  Re: getting speed out of a za50Re: derek derek 01/20/10 09:17PM
  Re: getting speed out of a za50Re: Jake Harvey Jake Harvey 01/21/10 02:20PM
You must log in before posting to this forum.

Click here to login.