Re: tuning 20mm VM Mikuni carburetor

Rick /
This single post is part of a larger thread. Start from the top or view this post in context.

Wrap a piece of tape around the throttle grip and mark the throttle casting somewhere. Now mark the tape to correspond to the baseline on the throttle casting for closed and wide open. Then divide that area with two more marks to get 1/4 throttle increments. Now you can ride it and know where the problems are. 1/4, 1/2, 3/4 or full throttle position.

Go to this site and dwld the Mikki manual and track down the area that needs tuning, choose the parts, or jets and have at it.

http://www.mikuni.com/fs-tuning_guide.html

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account