MOPED ARMY

well the biturbo is kinda falling apart, had the cant start to fall off, so i used an amp can and 2 hose clamps to "fix" it. works and looks kinda neat. id really like to get some launch speed, it doesnt do shit till it hits second/20 mph. but im a big guy and want to keep the top end if not increase it some. i know sprockets do weird thing (increase top, decrease take off & vice versa). ive got a 22 rear i think, so blah.

thanks steve!

suggestions on how? funny thing tho....when i bought it apparently the original dealer had put motor oil in the trans case. fun times.

Get ya search on!

http://www.mopedarmy.com/forums/discuss/read.php?f=7&i=143254&t=142833

I rode my friends pinto and he had a proma circuit pipe and its still pretty slow off the jump,(stock E50) it doesnt seem to hit until 15-20mph and its geared low. I know its a puch but same principle.

I say go with the tomos tecno circuit, but a kit im proves take off significantly!

ok, so estoril it may be., but will there be any pedal issues? also, could you give me a rough guess as to the jet id need since the one i have is drilled and i have no clue?

I just ordered the estoril for my LX putting it on this weekend..got some 60+ jets as well..prolly just gonna roll w/ that and remove stock airbox for now..i've heard mixed things about pedal clearance so i'll just have to see for myself when it gets here. I'll post up about it but i won't have anything to compare it to because previous owner ran it with NO EXHAUST!

I've just started using the estoril and I had to make a new bracket to make mine fit. You might have to drill a new hole in the exhaust bracket. Or it might bolt right on.

You don't know what kind of card you have? It's most likely the dell 14/12

I installed a techno estoril on my Sprint about 2 weeks ago. there were minor probs with the bracket and pedals..If you want to see I can post some pics..

Here's the pictures, tell me if it don't come out, I'll do it again.

The exhaust bracket didn't mout up so I drilled a new hole and bent the bracket towards the pipe, then bent the ped bracket up and in and it fit perfect.

My clearance on my pedals is kind of close. I bent them a little and ground down the inside edge of the arm now I have like a 1mm clearance.

im gonna have to high temp paint it if i do!

hey i really need a techno estroil anyone have one they will sell?

but do you have the stock pipe?

I'm running a jamarcol pipe at the moment, but have a Bi-turbo on the way. Will post again when I've got it on. The 59 jet with no airbox and the jamarcol pipe still runs a little rich. Don't know how the Bi-turbo will change that.

Unless you ride in a really dusty environment, I'd ditch the air filter and use the screens that are standard on the 14:12. If you're having trouble starting, then you're going the wrong way. The Bi-turbo should help. The more air you can get in, the better off you are (along with the proper jet).