Help me pick a carb for my A35 build

Here is the deal: I got the A35 with the offset intake and my original plan was to add the 15/15 dellorto and be done. Now Im thinking maybe a better carb would be good. I go to dellorto direct and they got all kinds of shit, PHBG, PHVA, BS, BD, DS. I got no clue what any of that means though.

Here is what Im looking for: has to fit on the original intake manifold and I have to be able to adjust it from the right side. Also no cable choke. Any of those carbs fit this description? Thanks peeps

Re: Help me pick a carb for my A35 build

Nobody has anything other then a Sha on a stock intake?

Re: Help me pick a carb for my A35 build

I wouldn't go with anything larger than 14mm on that intake, the stock 14/12 carb is just fine.

Re: Help me pick a carb for my A35 build

I didnt feel like chopping the plastic sidecovers to get a bigger intake and a bigger carb in. Maybe I will after all...

Re: Help me pick a carb for my A35 build

What are the specs on the engine? The 14/12 is fine for the 50cc cylinder. Those older model aprillia rs50 motorcycles use the same SHA 14/12 carb. They make like 6hp and are good for about 45-50mph.

Re: Help me pick a carb for my A35 build

Well the build plan so far is:

Alukit w high comp head mild porting

Tecno Bullet

Boyesen reeds

Tuned clutches

Hpi ignition (maybe)

Re: Help me pick a carb for my A35 build

In that case you really should go for a custom made intake.

« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account